Watsequip Guardian Control System

sku Product SKU:  Guardian™ Control System

The Guardian^TM is designed to be the only power unit you’ll ever need. The Guardian will operate any brand of compactor, even our competitors’ compactors. This reduces inventory requirements because it’s the only power unit you’ll need to stock to operate your entire line of compactors. Loaded with features, the Guardian is simply the best compactor power unit in the industry.

• The Guardian automatically alerts the operator when maintenance is due so important preventative maintenance tasks are not overlooked
• Dual Watch Dog^TM timers prevent unintended continuous operation to prevent motor burnout
• Eliminates unnecessary hauls associated with false full readings
• Low DC voltage controls improve operator safety by reducing the risk of electric shock
• NEMA 4 rated enclosure provides superior protection from windblown dust, splashing water and hose directed water

USD 0.0000

WasteCaddy

sku Product SKU:  WasteCaddy

Prevents the physical strain and pain associated with pushing or pulling heavy dumpsters and trash containers to curb side for pickup by waste haulers. 

• WasteCaddy Dumpster Tow Pulls Garbage Dumpsters up to 5000 lbs
• 36 Volt 3 Battery System
• Dumpster Brackets Bolt/Weld to Dumpsters
• 0-3 MPH Forward/Reverse
• Works Up Inclines, Snow, Or Ice
• Charger works with 120/220 Hz Outlets

USD 0.0000

Pre-Crusher Compactor (2.5 - 7 cubic yard chamber)

sku Product SKU:  Pre-Crusher Compactor (2.5 - 7 cubic yard chamber)

The Sebright Precrusher offers a 5” steel wall to crush trash against, and with a resultant ram force rating of up to 74 and 113,100#’s of compaction force, waste material is reduced to a fraction of the original volume. The Precrusher is available with the single 7” cylinder or the twin 6” cylinders on models from the 5260 to the 10660, and is engineered to destroy anything placed into the chamber. Rubbish that tends to have memory is completely crushed before being pushed into the container, making it a good solution for product destruction. The Precrusher function can be by-passed when desired, and the Precrusher and regular compaction can be programmed to run at different force settings.

Precrushers are available in a variety of configurations, whether you need to have a free standing unit for loading in the lot with a forklift or pay loader or you need complete security and an enclosure with a drive on deck – plus many other options – Sebright can engineer your installation for your site.
 

USD 0.0000

Sebright Model 9884T Transfer Station Compactor

sku Product SKU:  Transfer Station Compactor 9884T (8 cubic yard)

This mini transfer station compactor was designed to pack into semi-trailers for maximum loads and reduced transportation. The Sebright Model 9884T has a 50 HP motor and twin 6” cylinders for resulting maximum pressures of 101,772 lbs, and is engineered with extreme use in mind and will reduce downtime, lower maintenance, lower operating costs, saving you time and money.

Common Applications: Municipal and commercial transfer stations, recycling facilities.

USD 0.0000

Sebright Model 12084T-2-6 Transfer Station Compactor

sku Product SKU:  Transfer Station Compactor 12084T (9 cubic yard)

This transfer station compactor is available in both twin 6” cylinder with 121,583 lbs of pressure and twin 7” cylinder with 165,486 lbs. of pressure. Both models are engineered for high volume, low maintenance operation for many years.

Common Applications: Municipal and commercial transfer stations, large recycling facilities.

USD 0.0000

Sebright Transfer Station Compactor 12680T-2-7-170-PW

sku Product SKU:  Transfer Station Compactor 12680T-2-7-170-PW (13 c

This transfer station compactor is designed for high performance and long life, with extra heavy duty reinforced steel construction to accommodate a high volume waste and recycling transfer trailer facility.

Common Applications: High volume waste and recycling transfer trailer facilities.

USD 0.0000

Self-Cleaning Stationary Overhead Suspended Electromagnets

sku Product SKU:  Self-Cleaning Stationary Overhead Suspended Electr

Overhead or Overband magnetic separators suspend above belt or vibratory conveyors, magnetically lifting ferrous metals out of bulk material. They are used for steel recovery; or protecting processing equipment, removing damaging tramp metal that can cause costly repairs and downtime.

Features:

• 10-YEAR WARRANTY against coil burnout
• No need for external expansion tank - oil expansion takes place internally
• Coil exceeds Class "H" insulation rating
• Heavy duty belt standard
• Class II direct drive motor
• Additional wear plate provides extra protection  for the magnet impact area

USD 0.0000

Eddy Current Separator

sku Product SKU:  Eddy Current Separator

Dings Eddy Current Separators use powerful rare earth magnets for recovering aluminum and other non ferrous metals from recyclables, plastics, glass, material processed at composting or waste-to-energy facilities, automotive shredder residue, and other processed material or minerals.

USD 0.0000

Self-Cleaning & Stationary Overhead Permanent Magnets

sku Product SKU:  Self-Cleaning & Stationary Overhead Permanent Magn

Permanent overhead magnets are non-electric suspended type separators, suspended over a conveyor or head pulley to remove ferrous metals. No external power source is required for the magnet.

—SELF-CLEANING 

HIGH-VOLUME Separation. Metal attracted by the self-cleaning model is automatically and continuously removed from the magnet face by a belt that travels around the body of the magnet.

— STATIONARY 

LOW-VOLUME Separation.

This maintenance-free design has no moving parts and requires no power supply. Just suspend it over the conveyor or over the head pulley and it's ready to pick up stray meal fragments before they can cause damage to downstream equipment.

USD 0.0000

Hustler OCC Screens

sku Product SKU:  Hustler OCC Screens

For improved separation of varying material mixes, each deck of our OCC Screens features a dedicated drive for independent deck speed control. Our OCC Screens are 78" wide, include two 15' decks, 26" diameter abrasive resistant steel discs, and inverter duty brake motors.

Supports and chutes can be custom designed to meet specific requirements.

USD 0.0000

News & Mixed Paper Screens

sku Product SKU:  News & Mixed Paper Screens

Hustler News & Mixed Paper Screens accurately and efficiently separate containers from fiber. They come in 96" wide and feature special clamp-on two piece discs with split square hubs. The special urethane compound dramatically increases the life of the disc and the square hub reduces wrapping. The split disc design reduces replacement time.

News & Mixed Paper Screens also include efficiency inverter duty electric brake motors and hydraulic power units for screen angle adjustment. Plus harness tie offs and access doors with safety interlock switches for enhanced safety.

Supports and chutes can be custom designed to meet specific requirements.

USD 0.0000

FINES REMOVAL SCREENS

sku Product SKU:  FINES REMOVAL SCREENS

Hustler Fines Screens feature abrasive resistant steel discs spaced to remove fines but not containers from the system. For enhanced safety they include harness tie offs, guards, and disconnects. Fines screens come in 72" wide and use premium efficiency inverter duty electric motors. Supports and chutes can be custom designed to meet specific requirements.

USD 0.0000

BaleWulf HB Closed Door *in stock*

sku Product SKU:  BaleWulf 4560 HB

The Balewulf Line of Balers are versatility perfected. Constructed out of the highest quality materials and components the BaleWulf is a shining example of the unparalleled high quality that you have come to expect from Sebright Products Inc.

With a chassis made of AR400 steel and a T1 Tool Steel progressive shear this baler can handle OCC, plastics, nonferrous metals, and even roll cores! Safety is just one of the areas where the BaleWulf pulls away from the pack with the usage of a vertical interlocking door and through the door wire feed system. Other key features like an optional pneumatic clean out system and integrated piercer help keep the wire guides clear of debris and save time on tying a bale.

 

Through the Door Wire Feed System

The groundbreaking feature of the BaleWulf is the Through the door wire feed system that accepts both quick lock and looped end wire. The system allows the operator to feed and tie off wires from one location, standing at the door of the baler. Never before seen in the baler industry, this is a safer and more economical design than traditional balers.

Integrated Piercer

The integrated piercer is on of the key innovations of the BaleWulf. This design clears the wire channels in the ram face and guides the wire through, allowing for a quick bale tie off. The teeth of the piercer bolt on for easy replacement. By eliminating the need to be on to of the baling chamber to clear the channels, the safety advantages of the piercer cannot be understated.

Progressive Shear

The progressive shear is made from T1 Tool Steel (A514), a material that is extremely tough and allows the blades to keep thier cutting edges far longer than a typical cold rolled steel blade. The progressive design utilizes a tampered cutting edge and serrated blade that decreases the surface are in contact with the materials, which allows for more recyclables to be sheared at once.

Vertical Interlocking Ejection Door

The vertical interlocking ejection door is a safer design than a hinged baler door.  The door interlocks with the chassis floor and is constructed with heavy duty material.

 

Download PDF

2021 Wastequip Body Dump- WQ1101

sku Product SKU:  32150

USD 0.0000

2022 Wastequip 265X-F *on order*

sku Product SKU:  34107

*picture coming soon*

USD 0.0000

GapVax HV-57 Series Wet/Dry Vacuum Truck

sku Product SKU:  100

GapVax vacuum trucks are built around an industry-leading filtration system that delivers lower operating costs, longer equipment life, easier maintenance, and exceptional resale value. Designed by operators and mechanics for real-world conditions, GapVax trucks eliminate common issues like clogged bags, blower overheating, and carryover damage.

Every truck is custom-built to customer requirements, with options for extreme cold or hot environments. From pipelines and power plants to oilfields and shipyards, GapVax trucks are built to perform in the toughest conditions and provide years of reliable service. 

Key Benefits:

• Removes up to 90% of carryover
• Extends filter bag life to 1,500–2,000 operating hours
• Custom-built to customer requirements
• Available with Cold Weather or Extreme Heat packages
• Proven in pipelines, power plants, oilfields, and shipyards

Specifications:

Debris Tank	17 cubic yd
Water Tank	1,000 gallons
Blower Hg	27''
Blower CFM	5,250
Tube Boom	25 ft reach from center
Rubber Boom	18 ft reach from center
Cyclone Filtration System	7
Water Pump	10-20 GPM @ 3000-4000 PSI
Height	Less than 13 ft 6 in
Width	8 ft 4 in

Compatible Options:

• Cold or Hot Weather Package
• Pump Enclosure
• Pressure Off
• Pump-Off

USD 0.0000

Gapvax MC-1510 Series Vacuum Truck

sku Product SKU:  101

GapVax combination sewer cleaning trucks are built to deliver maximum performance with the lowest long-term cost of ownership. Designed alongside operators and maintenance professionals, they feature heavy-duty components, durable stainless steel construction, and easy service access to reduce downtime.

Every truck is engineered for productivity, with ergonomic storage, operator-focused design, and real usable tank capacity. Built for the toughest environments, GapVax combination trucks provide years of reliable performance and fleet value. 

Key Benefits

• Easy-to-access service points for hassle-free maintenance
• Single operator control panel and remote boom control
• Easily breaks through the toughest blockages to clean sewer lines quickly 
• Durable design built for long-term service life
• Proven in sewer cleaning, stormwater maintenance, hydro excavation, and industrial cleanup

Specifications

Debris Tank	10 cu yd
Water Tank	1,500 gallons
Blower Hg	16 - 27"
Blower CFM	3,500 - 5,900
Boom	26 ft reach from center
Hose Reel	800 ft of 1 in hose at 270 deg
Jetter Pump GPM	60-100 gpm
Jetter Pump PSI	2000 to 3000 psi
Height	Less than 13 ft 6 in
Width	8 ft 4 in
Chassis	Tandem Axle 6x4

 

Features

• Powerless engine inspection capability: allowing you to access the engine without needing to turn on the truck
• Low-unified tank design
• Engineered with high-capacity positive-displacement blowers capable of lifting heavy sludge, compacted debris, and solids from the deepest lines in the system
• Concentrated, high-pressure water is used to break apart hardened grease, root intrusions, and packed debris that lower-pressure equipment simply cannot clear
• Top-loading tanks with smooth interiors for larger rated volume
• Heavy-gauge, 304 corrosion-resistant stainless steel and carbon steel

USD 0.0000

Gapvax VHE-1012 Series Wet Vacuum Truck

sku Product SKU:  102

GapVax VHE-1012 Series Hydro-Excavators combine over 30 years of industrial vacuum experience with a cost-effective, operator-focused design. Built for reliability and easy maintenance. The VHE features a full-opening tailgate, low center-of-gravity tank design, ergonomic tool storage, and simple service access to key components

Available winterization options help keep crews productive in cold weather. Gapvax hydro excavator delivers exceptional uptime, operator comfort, and long-term value without paying for unnecessary extras! 

Key Benefits

• Durable construction and user-friendly layout minimize downtime and operating costs
• Winterizable truck options
• Maintain year-round truck operations with enclosed & heated compartments
• Easy access for maintenance
• Additional customizable options available
• Ideal for contractors and municipal industries

Specifications

Debris Tank	12 cu yd
Water Tank	1,000 gallons
Blower Hg	16 - 27"
Blower CFM	3500 - 4500
Water Pump	10 to 20 gpm @ 3000 to 4000 PSI
Front-Mounted Boom	26 ft reach from center
Rear-Mounted Boom	25 ft reach from center
Height	Less than 13 ft 6 in
Width	8 ft 4 in
Chassis	Tandem Axle 6x4
Optional: Water Heater	400,000 BTU

Features

• Heavy-duty steel debris tank & stainless steel water tank with low center of gravity for stability and safer handling
• Heated pump enclosures
• Anti-freeze & glycol systems
• Waterproof control panels & air-out systems
• Ergonomic tool storage provides easy access to regularly used items like vacuum tubes, hoses and water lances
• Clears out stubborn material with the debris body vibrator
• Durable interior coating in the debris tank
• Easy-to-adjust tailgate hinge and locks for quick and hassle-free maintenance

Compatible Options:

• Winterizable truck
• Stainless steel debris body
• Heated cabinets for water pump and hose reel
• Water recirculation system
• Pump-off systems
• Body Flush-out system
• Water heater
• Various lighting options
• Storage options

USD 0.0000

GapVax VHX Series Wet/Dry Vacuum Truck

sku Product SKU:  103

The GapVax VHX is a versatile hydro excavation truck engineered to deliver exceptional performance, reliability, productivity, and quiet operation while maintaining legal road weights and maximizing payload capacity. Designed by operators for operators, the VHX combines GapVax's industry-leading filtration technology, durable construction, and user-focused features to tackle a wide range of hydro and air excavation applications.

With customizable options for cold weather and air excavation packages, the VHX can perform in virtually any environment year-round. Whether working in urban utility projects, construction sites, or harsh winter conditions, the VHX provides the power, flexibility, and quieter operation needed to keep crews productive while minimizing jobsite disruption.

Key Benefits

• Ideal use for powerful wet or dry excavation projects
• Ultra-efficient cyclones & Long-lasting filter bags
• Low-noise engineering helping to reduce jobsite disruption
• Compact design for more maneuverability
• Bridge Law compliant
• Full-tilting debris body for faster unloading and cleanout
• Optional Air Compressors, Stainless Steel Debris Body, Cold Weather Packages, etc
• Ideal for Municipalities, Excavation & Utility Contractors

Specifications

Payload Capacity	15,000 lbs
Water System	13 GPM @ 3,000 PSI
Water Tank	750 gal (Two 375 gallon poly tanks)
Blower HG	28’ HG
Boom Reach	22 ft
Boom Design	8” Tube-in-Tube with 15° Downward Pivot
Filtration System	Wet/Dry Cyclone Filtration
Excavation Capability	Hydro Excavation and Optional Air Excavation
Debris Tank	7.5 cu yds
Dump Angle	45°
Overall Height	12 ft 2 in

 

Features

• Full opening tailgate with field-adjustable locks assuring a complete seal
• Full bearing body pivot
• Noise and vibration dampening mounts on blower and transfer case
• Heavy-duty electric vibrator with thermal overload protection
• Dual rear splash plates
• Body and tailgate safety props

Compatible Options

• 200 CFM Air Compressor Package
• 400,000 BTU or 575,000 BTU Water Heater Packages
• Cold Weather Package
• Air Excavation Configuration
• Remote Wireless Controls
• Custom Vehicle and Equipment Configurations: Onboard Scale, Glycol Injection, Liquid Level Load Indicator, Auxiliary Lift Axles, Heated Vertical Cabinet, Tailgate Load Port, Additional Storage and Lighting options

USD 0.0000

GapVax GJET Series Jetter Truck

sku Product SKU:  104

The GapVax GJET offers a cost-effective solution without sacrificing the durability, reliability, and quality that define their combination trucks. The jetter trucks deliver easier maintenance, longer equipment life, and lower operating costs.

Engineered with a front-mounted hose reel and dual frame rail support, the GJET enhances operator safety, improves structural strength, and extends component life. Multiple safety features, including internal tank baffles and integrated safety interlocks, help reduce risk on the jobsite and on the road. Available in customizable water capacities ranging from 1,000 – 3,000 gallons. The GJET is a cost-effective and reliable jetter truck to tackle pipeline cleaning with ease. 

Key Benefits

• Customizable Options: Water capacities from 1,000 – 3,000 gallons
• User-friendly controls
• High-performance water pump system
• Optimized designs that balance water capacity, storage, and axle weights
• Ideal for Municipalities, Plumbing & Sewer Contractors

Specifications

Water Pressure	2,500 psi
Water Flow	80 gpm
Water Capacity	1,000 - 3,000 gal

Features

• Durable stainless steel water tank
• Hose reel mounted on dual frame rails extends beyond the engine to improve the strength of the reel, keep the operator away from the cab, and extend the life of the bearing
• Baffles help to guard against tipping when driving with a full-load
• Helps prevent operator with safety interlocks
• Front-mounted location guards against traffic

Compatible Options

• Customizable Water Capacity: 1,000 to 3,000 gallons

USD 0.0000

21/22 Amrep HX450 Front Loader with push out dump

sku Product SKU:  110

The Amrep HX450 Front Loader is engineered for long service life, exceptional strength, and maximum efficiency. Designed to handle demanding waste collection operations, it features an 8,000 lb lifting capacity, rapid 14 to 18 second lift cycles, and an advanced computerized packing system.

Available in a variety of body sizes and lengths, the HX450 can be equipped with either full push-out ejection or hoist-to-dump capability, providing the flexibility to meet diverse refuse collection needs. From commercial waste collection to high-volume routes, the HX450 Front Loader delivers the productivity, reliability, and performance required to keep operations running efficiently. 

Key Benefits

• 8,000 lb lifting capacity
• Fast lift cycle times (14 – 18 seconds)
• Hardox® 450 body construction for durability and wear life
• Custom-built options: Body Length & Capacity
• Full Push-Out or Hoist Ejection Body Configurations
• Weather-resistant electrical connectors and harnessed wiring
• Computerized packing systems with selectable pack cycles
• Minimizes spillage
• Available for lighting, safety, and camera system packages
• Ideal for commercial waste collection companies, municipal sanitation departments, Industrial refuse hauling operations, high-volume collection routes requiring durable front-loader performance

Specifications

Body Weight	16,700 lbs
Lifting Capacity	8,000 lbs
Cycle Time	14 - 18 secs
Size Capacity	1 - 8 cu yds
Entire Body Shell	1/8”, 4mm or 3/16” Hardox 450
Hopper Sides	4mm or 3/16 Hardox 450
Rear Door	1/8” Hardox 450
Body Configurations	Full Push-Out or Hoist Ejection
Cab Canopy Side & Top	14 gauge mild steel
Packer Follower Cover	10 gauge high tensile steel (low blade only)
Packer Blade Face & Sides	¼” Hardox 450, 3/8” Mild Steel
Packer Blade (H x L x W)	60” x 30” x 80”
Loading Capacity	8,000 lbs
Side Pocket Forks	6-1/2 x 1-1/4 x 51”
Tubing	3-1/2” O.D. x 1/2” wall 80,000 psi
Bushing size	4-1/2 x 3-1/2 x 2-1/2
1st Stage (pack)	6-1/2” I.D.
2nd Stage (eject)	5“ I.D.
3rd Stage (eject)	3-1/2” I.D.
Packer Cylinder Stroke	162-3/4“
Hardox 450 Tensile Strength	180,000 psi
Hardox 450 Tensile Yield	145,000
Hardox 450 Tensile Brinell	450

Features

• Hardox® 450 body construction for durability and wear life
• Weather-resistant electrical connectors and harnessed wiring

Compatible Options

• Body Length & Capacity
• Full Push-Out or Hoist Ejection body configurations
• Lighting Package: Ecco strobe on rear door, four additional rear flashing lights, two rear-mounted spotlights, additional rear/center mounted break light
• Safety Package: Fire extinguisher, triangle road kit, spill kit
• Camera System Package: One rear camera, two camera rear/right cab, four camera rear/left cab/ L-R alley

USD 0.0000

GALBREATH U4/U5-DPHK-176 Roll Off Hook Hoist

sku Product SKU:  32802

*Stock Photo*

Engine: DETROIT DD13 12.8L 470 HP @ 1625 RPM, 1900 GOV RPM, 1650 LB-FT @ 975 RPM 

Transmission: Allision 4500 RDS

Color: White

• Contoured Poly Tandem Fenders 
• Work lights - (2) - 4'' LED
• High Visibility Package- One (1) Beacon Light on Tarper Gantry (2) Work Lights on Tarper Grantry and (2) Strobe Lights in The Bumper 
• Adjustable hook heights via pull pin design (54” & 61 ¾”) 
• Toolbox
• Pioneer RP4500 Rack n' Pinion Tapping System
• Versatility for the user to lift containers (16'-20') of varying heights and weights

 

USD 0.0000

BaleWulf 2 Ram

sku Product SKU:  00098

The BaleWulf Two Ram Balers have been designed with the user in mind. From the user-friendly touch screen menus, easy access maintenance features, to the customized commodity recipes. Available in two models, the 4560-2R (45” x 60” chamber) and the 7060-2R (70” x 60” chamber) that have the versatility to bale multiple commodities. Featuring an industry leading, 5 YEAR/ 10,000 HOUR chassis warranty, 2 YEAR/ 4,000 HOUR parts warranty, and a 2 YEAR/ 4,000 HOUR all-inclusive planned maintenance program.

 

Built with Sebright Products industry disrupting standards of quality and JWR’s world class service capabilities. The foundations of the BaleWulf Line of Balers are SAFETY, VERSATILITY, AND QUALITY without sacrificing performance.

Utilizing low HP and low operating PSI to achieve your target bale weights without putting undo stress on the baler. The BaleWulf Line of Balers are designed for long term operation with minimal maintenance

 

Clear Lexan Polycarbonate rear panels with an ultra-bright industrial LED work light comes standard on all BaleWulf models. With this feature users are able to perform a visual inspection without the need for lockout-tagout procedures. Utilizing light weight Lexan panels and a bright work light, provides a clear advantage in routine maintenance.

 

The ground-breaking feature of the BaleWulf Two Ram Baler is the industry first, Pack Shoe Adjusters. This innovative design allows the ram to keep tolerances tight and allows for more finite adjustments of the ram. No shimming or lifting of the ram necessary, saving you time and money.

 

Another innovative feature of the BaleWulf Two Ram Baler, is the Bolt in Liners. Minimal welding and torch cutting required, you can change out the frame floor and ram floor liners using sockets and wrenches. Which results in less down time for maintenance.

USD 0.0000

Aries TrailBlazer Mobile Enclosure

sku Product SKU:  99900