{{minicart.cartList.length}}
You have no items in your quote list.
You have 1 item in your shopping cart.
{{multiCartItemsStr.replace('[COUNT]', minicart.cartList.length)}}
{{cartItem.ProductName}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
Qty: {{cartItem.Quantity | number : 2}}
Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}} 		{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Subtotal {{minicart.cartTotals.SubTotal | currency : '$' : 2}}
Image Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}} 		{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Description Created
{{savedCart.Description}} {{savedCart.CreateDate | date : 'M/d/yyyy h:mm a'}}
SKU Product Name Unit Cost Qty Line Total
{{cartItem.ProductSku}} {{cartItem.ProductName}} {{cartItem.UnitCost | currency : '$' : 2}} {{cartItem.Quantity | number : 2}} {{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your saved shopping cart.
You have no items in your wishlist.
Status Order No. Order Date Ship To Order Total Pay Total Balance
Bill Me Later Open Ready To Ship Shipped Picked Up Cancelled Incomplete On Hold Back Ordered Returned {{order.Status}}
{{order.OrderID}} {{order.OrderDate | date : 'M/d/yyyy'}} {{order.ShipFirstName}} {{order.ShipLastName}}, {{order.ShipAddress1}} {{order.ShipAddress2}}, {{order.ShipCity}}, {{order.ShipState}} {{order.ShipZipcode}} {{order.GrandTotal | currency : '$' : 2}} {{order.PayTotal | currency : '$' : 2}} {{order.GrandTotal - order.PayTotal | currency : '$' : 2}}

 

Front Loaders

For businesses and municipalities requiring robust, high-capacity waste collection solutions, JWR’s front loaders provide the perfect combination of efficiency, durability, and ease of use. These versatile machines are designed to collect large volumes of waste quickly and efficiently, making them ideal for commercial and industrial applications where waste accumulation can be significant.

JWR’s front loaders are engineered to reduce the time and labor required to service waste containers, allowing operators to focus on maximizing route productivity and minimizing fuel consumption.

Logo

JWR Quote Builder

JWR is an authorized reseller of 28YD, 33YD, 40YD, and 44 YD Front Loader Refuse/Garbage Trucks.

Grid View List View Sorting: Normal Sorting: Price Low to High Sorting: Price High to Low Sorting: New Arrivals Sorting: Brand A-Z Sorting: Brand Z-A

21/22 Amrep HX450 Front Loader with push out dump

sku Product SKU:  110

Amrep’s HX450FL front load refuse truck is available in multiple sizes and lengths, with full push-out or hoist ejection. Amrep's unique shaped construction, using Hardox® material, allows for a simple and clean design, providing greater strength and wear life.  

  • Body Construction

    • Entire body shell: 
      1/8”, 4mm or 3/16“ Hardox 450
    • Hopper sides: 
      4mm or 3/16” Hardox 450
    • Rear door: 
      1/8” Hardox 450

  • Lifting Mechanism

    • 14 - 18 Second cycle time
    • 1 - 8 cu yd capacity
    • Side pocket poks with dock loading capability
    • 8,000 lb lifting capacity
    • Replaceable bronze insert X-shaft bushings

  • Packing System

    • High blade or low blade with follower (low blade with follower requires horizontal exhaust)
    • Selectable pack cycles
    • Follow plate to prevent spillage behind blade
    • Full eject or hoist to dump

  • Electrical System

    • Computerized packing system
    • Packing function display
    • Harnessed wiring
    • Weather resistant quick connectors

  • Body Construction 

    • Body shell - 1/8”, 4mm or 3/16“ Hardox 450

  • Hopper Construction 

    • Lower sides - 4mm or 3/16” Hardox 450
    • Upper sides - 4mm Hardox 450

  • Hydraulic Read Door

    • Hydraulic actuated single rear steel convex door
    • Door sheets - 1/8” Hardox 450

  • Cab Canopy

    • Sides and top - 14 gauge mild steel

  • Packer Follower (Low Blade Only)

    • Attached to top of packer blade to prevent refuse from collecting in front area of body
    • Follower cover - 10 gauge high tensile steel (low blade only)

  • Packer Blade

    • Push type “A” frame box with shoes to slide In
    • Full length channel guides on body floor
    • Face - 1/4“ Hardox 450
    • Sides - 3/8” Mild Steel
    • Length - 30“
    • Width - 80”
    • Height - 60“ (high blade - 84”)
    • Guides - 6 x 15.3# channel full length of body
    • Wear guides - Hardox 500 wear plate

  • Ladder

    • Right side of body to provide access to body roof with PTO lockout when in use

  • Loading Mechanism

    • 8,000 lb capacity, rectangular tubing with flat bar straps and reinforcement gussets

  • Forks, Cross Shaft & Bearings

    • Side pocket forks 6-1/2 x 1-1/4 x 51”
    • Cross shaft - cold drawn seamless tubing
    • Tubing - 3-1/2” O.D. x 1/2” wall 80,000 psi
    • (2) Bronze bushings grooved for lubrication
    • Bushing size - 4-1/2 x 3-1/2 x 2-1/2

  • Arm Cross Shaft & Bearings

    • Cold drawn seamless tubing, bolt on mounting
    • 4-1/2” x 1/2” x 80,000 psi (3/4” & 1” optional)
    • Mounting - “U” bolt half cap wall mounted
    • (2) Full and (1) half bronze bushing grooved for lubrication
    • Full bushing - 6” O.D. x 4-1/2” I.D. x 6” long

  • Deceleration Value

    • To allow maximum operating speeds without driver correction

  • Container Stops

    • Rubber pads mounted inside forks at shaft

  • Hoses and Fittings

    • HD double wire braided parker 100r2
    • SAE hose with jic fittings
    • Zinc dichromate seamless steel tubing

  • Reservoir 

    • 60 Gallon capacity with breather cap shut off
    • Valve and tank drain plug
    • A 20-micron return line filter cartridge with a 20 psi bypass valve
    • Vertical baffles, 150-micron re-usable suction filter

  • Controls

    • Air controls mounted in cab to the right and forward of operator and outside on the street side of the body

  • Control Valve 

    • Commercial A-35 with built in relief valve

  • Power Source

    • Front mount or transmission mounted gear pump

  • Packer Cylinders

    • (2) Three stage telescopic, double acting, all chrome stages
    • 1st Stage (pack) - 6-1/2”I.D.
    • 2nd Stage (eject) - 5“ I.D.
    • 3rd Stage (eject) - 3-1/2” I.D.
    • Stroke - 162-3/4“

  • Arm Cylinders 

    • (2) - Single stage, double acting bore - 4” stroke - 48-3/8“ rod - 2” chrome

  • Fork Cylinders

    • (2) Single stage, double acting bore - 3“ stroke - 21” rod - 1-1/4“

  • Rear Door Cylinders

    • (2) Single stage, double acting bore – 2-½” Stroke – 35” Rod – 1-1/4” chrome

  • Hopper Cover Cylinder

    • (1) Single stage, double acting bore - 2” stroke - 93” rod - 1-1/4” chrome

  • Hydraulic Oil 

    • Anti-wear, corrosion, oxidation and foam inhibitors
    • ISO viscosity grade - 46
    • API gravity - 31
    • Viscosity - 220 @ 100 Deg. F
    • Flash point - 430 Deg. F

  • Lights

    • Standard ICC lights and reflectors conforming to California state vehicle code. “Truck-Lite” tail, stop, back up and directional lights

  • Mid-Body Turn Signal 

    • Directional lights mounted at mid-point of body

  • Rear Door Liquid Catch 

    • Steel construction installed under rear door to prevent liquid spill

  • Clean Out Doors 

    • Two doors at front of body 10“ x 31” (low blade only)
    • Full access door on street side of body (high blade only)

  • Steel Specifications 

    • Tensile strength - 180,000 psi
    • Tensile yield - 145,000
    • Brinell - 450

  • Estimated Body Weight

    • 16,700 lbs (options may affect total body weight) lighter bodies available with material modifications

 

USD 0.0000

There are no products for your selection at this time. Please contact us for more information.

Why Choose Front Loaders from JWR?

  • High-Capacity Collection
    Front loaders are equipped to handle large containers, making them perfect for industrial and commercial waste collection. Their powerful lifting capabilities mean that even the heaviest bins can be serviced quickly and efficiently, without the need for multiple trips.
  • Rugged Design for Durability
    Built to withstand demanding environments, JWR’s front loaders are constructed from high-quality materials that ensure long-term durability. These machines are designed to perform in harsh conditions, minimizing the risk of breakdowns and reducing maintenance costs.
  • Easy to Operate
    JWR’s front loaders are designed with the operator in mind. Intuitive controls and ergonomic features make them easy to handle, ensuring that even complex waste collection routes can be completed with minimal effort. The ease of operation also reduces the training time required for new operators, improving overall efficiency.

 

Key Features of JWR Front Loaders:

  • Increased Route Efficiency: Front loaders enable faster waste collection, allowing operators to service more bins in less time, which translates to higher productivity and cost savings.
  • Reduced Labor Costs: By automating the lifting and emptying process, front loaders minimize the amount of manual labor required, reducing staffing costs and injury risks.
  • Fuel Efficiency: JWR front loaders are designed with fuel efficiency in mind, ensuring that your waste collection routes are completed with minimal fuel consumption, reducing your environmental footprint and operational costs.
  • Customizable Options: JWR offers a range of front loader models to meet the specific needs of your operation, whether you're servicing commercial properties, industrial sites, or municipal routes.

 

Applications for JWR Front Loaders

  • Commercial Waste Collection: Ideal for businesses that generate large volumes of waste, front loaders provide a cost-effective solution for servicing dumpsters and other large waste containers.
  • Municipal Services: Municipalities benefit from front loaders' ability to handle high waste volumes while keeping operational costs low.
  • Industrial Sites: Front loaders are perfect for industrial applications where heavy-duty waste containers require efficient servicing.

 

The JWR Advantage

When you choose JWR, you’re partnering with a team that understands the complexities of waste management. We offer not only the best equipment but also expert advice on how to optimize your waste collection processes. Our team will help you select the right front loader to meet your needs, ensuring that you get the most value from your investment.

 

Contact Us Today

Ready to enhance your waste collection capabilities? Contact JWR Inc. to learn more about our front loaders and discover how they can improve the efficiency and cost-effectiveness of your waste management operations.


Looking for quality equipment?

JWR is your full service equipment supplier. We supply a full line of equipment to provide solutions to any recycling and waste handling situation. We offer the full package starting with site consultation, equipment selection, installation, mounting, logistics, repair service and planned maintenance. We will customize a complete package from concept to startup to meet your specific needs.

 

 

Contact Us!