{{minicart.cartList.length}}
You have no items in your quote list.
You have 1 item in your shopping cart.
{{multiCartItemsStr.replace('[COUNT]', minicart.cartList.length)}}
{{cartItem.ProductName}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
Qty: {{cartItem.Quantity | number : 2}}
Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}} 		{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Subtotal {{minicart.cartTotals.SubTotal | currency : '$' : 2}}
Image Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}} 		{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Description Created
{{savedCart.Description}} {{savedCart.CreateDate | date : 'M/d/yyyy h:mm a'}}
SKU Product Name Unit Cost Qty Line Total
{{cartItem.ProductSku}} {{cartItem.ProductName}} {{cartItem.UnitCost | currency : '$' : 2}} {{cartItem.Quantity | number : 2}} {{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your saved shopping cart.
You have no items in your wishlist.
Status Order No. Order Date Ship To Order Total Pay Total Balance
Bill Me Later Open Ready To Ship Shipped Picked Up Cancelled Incomplete On Hold Back Ordered Returned {{order.Status}}
{{order.OrderID}} {{order.OrderDate | date : 'M/d/yyyy'}} {{order.ShipFirstName}} {{order.ShipLastName}}, {{order.ShipAddress1}} {{order.ShipAddress2}}, {{order.ShipCity}}, {{order.ShipState}} {{order.ShipZipcode}} {{order.GrandTotal | currency : '$' : 2}} {{order.PayTotal | currency : '$' : 2}} {{order.GrandTotal - order.PayTotal | currency : '$' : 2}}

 

Specialty Equipment for Custom Waste Solutions

JWR has partnered with Sebright to offer a complete line of specialty equipment that addresses unique waste and recycling needs. From processing EPS to dewatering liquid from plastic and aluminum containers, our equipment is built to handle the details other systems can't - backed by full customization, installation, and service support from JWR.

Logo

JWR Quote Builder

JWR partners with Sebright to offer specialty equipment for EPS processing, container dewatering, shredders, and tippers for waste handling.

Grid View List View Sorting: Normal Sorting: Price Low to High Sorting: Price High to Low Sorting: New Arrivals Sorting: Brand A-Z Sorting: Brand Z-A

ROLLER CHAIN BELT CONVEYORS

sku Product SKU:  ROLLER CHAIN BELT CONVEYORS

Hustler Roller Chain Belt Conveyors are built to provide an efficient and cost-effective alternative to steel belt conveyors for lighter-duty material handling applications. Commonly used as sort line feeders or baler infeed conveyors, these systems deliver dependable performance while maintaining lower equipment costs.

JWR and Hustler custom designs conveyor systems to meet specific operational requirements, such as multi-ply rubber or PVC belting. Hustler Roller Chain Belt Conveyors offer flexibility, durability, and reliable material flow for a wide range of recycling and waste handling operations. 

Key Benefits

  • Custom-built to customer requirements
  • Cost-effective alternative to steel belt conveyors
  • Ideal for a variety of lighter-duty recycling and waste applications
  • Belting options available: multi-ply rubber or PVC belting

Specifications

Belt Width  18' to 8'
Belt Lenght Virtually any length available
Rollers Flanged sintered steel
Bushings Hardened steel
Chain Double strand C1045 steel chain
Side Wings Overlapping offset style
Overload Protection Shear pin sprocket hubs
Construction Heavy-duty open frame
Impact Protection Load bars to limit belt deflection

 

USD 0.0000

Maren ProPak 60 Closed Door Baler

sku Product SKU:  ProPak 60 Full Eject Baler

The Maren ProPak 60 is a closed door baler, part of JWR's full range of horizontal balers. Designed to simplify recycling operations, it features full eject functionality that clears the chamber completely after every cycle. With Smart Bale Technology, it automatically adjusts based on the selected materials. It can intelligently customize bale size and weight to meet your shipping requirements while providing real-time notifications on throughput, productivity, jam conditions, and maintenance schedules to keep operations running efficiently.

With the largest feed opening in its class, it easily accepts oversized materials and unbroken boxes while reducing jams. Built for demanding environments, the industrial baler delivers over 187,000 pressing force for dense, high-quality bales. From advanced safety features to operator-friendly controls and efficient bale technology, the Maren ProPak 60 provides a dependable recycling solution that helps facilities maximize productivity and bale quality.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes molded fiber products, OCC, newsprint, mixed & office paper, magazines & signatures, shredded paper, tissue mill broke, textile, foam, PET & HDPE bottles, ABS plastic, plastic film, aluminum cans, steel cans, steel sheet & formings, carpet and padding, aluminum and copper wire
  • Delivering up to 20% greater shearing performance and heavier bales than most competitive machines
  • Automatic alerts let operators know when a bale is ready, while on-screen instructions walk them through tying and ejecting the bale with the correct number and placement of ties
  • Customizable color options to fit your specific operations
  • Available in ProPak 60 & ProPak 60S configurations
  • Largest hopper, highest ram face pressure, and most durable baler of its class
  • Equipped with 1-2-3 Warranty: 1 year labor, 2 year parts, 3 year structure and cylinder
  • Ideal for recycling centers, distribution facilities, warehouses, manufacturing operations, and material recovery facilities (MRFs)

Specifications

Platen Force 187,000 lbs
Platen PSI 109 PSI
Operating Pressure 4200 PSI
Motor 20 hp TEFC motor
Electrical Control Panel UL/CUL/CE 508A Listed, NEMA 4 Rated
Oil Reservoir 150 gallons
No-Load Cycle Time 28 seconds
Bale Size 30″ H x 60″ W x (adjustable) 12″ - 51” L
Bale Shipping Weight 22,000 lbs
Feed Opening  54" x 40"
Baler Lenght  209"
Baler Width  80"
Baler Height 73"

Need ties for your bales? Check out our baling wire and twine supplies!

Features

  • Smart Bale Technology allows operator with the simple touch of a button to select a material then automatically adjusts for proper baling pressures, photo eye settings, wire tie placement and even sets bale sizes perfect for loading trucks or sea containers
  • Aggressive 27-point chassis shear blade and progressive platen shear that utilizes special bale chamber geometry all but eliminates shear jams
  • Massive material retaining dogs keep resilient materials from expanding back into the feed chamber after compression
  • Automatic bale decompression keeps operators safe by automatically retracting the main ram prior to allowing the door to be opened
  • Innovative piston pump hydraulic system delivers speed, baling force and shearing capabilities that exceed most competitor’s balers even equipped with larger HP motors.
  • Strong, interlocking construction
  • Extreme duty bale door designed after larger non-ferrous balers for ultimate in durability.
  • Oversized cylinder mounts offer unmatched strength and durability
  • Remote control station mounted near the front of the baler gives operator unrestricted view of the door area while ejecting a completed bale.

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 30 hp Motor: Voltages available 208, 230, 415, 460, 575 Volt, 50-60 Hertz, 3 Phase
  • ProPak 60S

USD 0.0000

Maren ProPak 60S Closed Door Baler

sku Product SKU:  ProPak60S Closed Door Baler

The Maren ProPak 60S is a closed door baler, part of JWR's full range of horizontal balers. Built for multi-material processing, it features full eject functionality that clears the chamber completely after every cycle. Utilizing Smart Bale Technology, the industrial baler automatically adjust baling settings based on the material being processed. From customizing bale size and weight for transportation requirements to monitoring performance, maintenance schedules, and jam alerts, it keeps operations running smoothly.

With the largest hopper opening and highest ram face pressure of its class, it efficiently handles bulky materials while producing dense bales. Available in both the ProPak 60 and ProPak 60S configurations, this baler can be tailored to meet the specific demands of your facility and material stream. With user-friendly controls, powerful compaction force and heavy-duty construction, the ProPak 60S delivers durable and reliable performance for demanding recycling environments.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Specifically designed for oversized boxes, slip sheets, foam, foam bedding
  • Delivers up to 20% more platen force pressure than most competitive machines
  • Easier operation for tie system with on-screen instructions walking through tying and ejecting the bale with the correct number and placement of ties
  • Largest hopper opening, highest ram face pressure, and most durable baler of its class
  • Customizable color options to fit your specific operations
  • Available in ProPak 60 & ProPak 60S configurations
  • Backed by 1-2-3 warranty: 1 year labor, 2 year parts, 3 year structure and cylinder
  • Ideal for distribution centers, warehouses, recycling facilities, and high-volume material recovery operations

Specifications

Platen Force 175,000 lbs
Platen PSI 104 PSI
Operating Pressure 3000 PSI
Motor 20 hp TEFC motor
Enclosure NEMA 12 Rated, UL Approved
Electrical Control Panel UL/CUL/CE Approved, NEMA 12 Rated
Oil Reservoir 150 gallons
No-Load Cycle Time 40 seconds
Bale Size 30″ H x 60″ W x (adjustable) 12″ - 51” L
Bale Shipping Weight 24,000 lbs
Feed Opening  54" x 70"
Baler Lenght  291.5"
Baler Width  84.5"
Baler Height 73"

Need ties for your bales? Check out our baling wire and twine supplies!

Features

  • AR400 abrasion-resistant wear plate for ultimate durability and virtually limitless service life
  • Smart shear features a 27-point chassis shear blade, progressive platen shear and utilizes special bale chamber geometry to all but eliminate shear jams
  • Easy tie system allows for easy feed of bale wire without debris obstructing wire travel path
  • Massive retaining dogs assist in keeping highly resilient material from expanding back into the feed chamber after compression
  • Automatic bale decompression - after a bale is tied off and complete in the chamber, the main ram automatically decompresses prior to allowing the operator to open the bale door
  • Streamlined hydraulic system exceeds performance of competitors' 30 hp. balers by utilizing high-efficiency pumps and minimizing hydraulic components, hoses, and leak points
  • Baler chassis, ram, and key components are fabricated using interlocking construction
  • Extreme heavy-duty door shares the same design as larger non-ferrous balers for ultimate in durability
  • Oversized cylinder mounts offer unmatched strength and durability
  • Remote-mounted controls for operation and bale ejection are mounted near the front of the baler, giving the operator an unrestricted view of the bale while ejecting a completed bale

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 30 hp Motor: Voltages available 208, 230, 415, 460, 575 Volt, 50-60 Hertz, 3 Phase
  • NEMA 4 Enclosure
  • ProPak 60

USD 0.0000

Maren 72 Automatic Baler

sku Product SKU:  Maren 72 Closed Door Baler

The Maren 72 Automatic Baler is a cost-effective, fully automatic closed door baler recycling solution designed to efficiently handle a wide range of scrap and recyclable materials. As a high-performance horizontal baler, it produces dense mill-size bales that help maximize material value while reducing storage and transportation costs.

A variety of optional features are available to allow operators to customize the baler for their unique application and workflow needs. With user-friendly controls, the baler automatically monitors material levels, initiates the baling cycle when needed, and alerts operators when a bale is ready for tying and removal. Compatible with pneumatic conveying systems, belt conveyors, and feed chutes, the Maren 72 is a dependable baler that helps facilities lower labor costs, increase productivity, and streamline recycling operations.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes paper trim, shredded paper, corrugated cardboard, light foil, steel cans, aluminum cans, foam, textiles, molded fiber products
  • Proven reliability with hundreds of installations across North America and beyond
  • Closed-door manual baler design for simple and dependable bale handling
  • Built to ANSI & OSHA standards
  • Compatible with pneumatic conveying systems, belt conveyors, and feed chutes
  • Customizable color options to fit your specific operations
  • Ideal for paper mills, printing companies, corrugated box manufacturers, packaging facilities, distribution centers, and recycling operations

Specifications

Lenght 180"
Width 50"
Height (with Infeed Chute) 76 ¾”
Height (at power pack end) 74"
Height (to top of Baling Chamber) 45"
Baling Chamber H x L x W 36” x 30” x 30”
Capacity of Feeder Hopper 19CF
Number of Bale Ties 4
Operating Pressure 1500 PSI
Thrust  42,390 lbs 
Pump  18 GPM
Cylinder  6” (dia.) x 38”
Motor 15 HP
Cycle Time  18 sec
Total Press Weight  7,000 lbs 

Need ties for your bales? Check out our baling wire and twine supplies!

Features

  • Rugged construction

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • Oversized Feed Hopper
  • Shear Knife

USD 0.0000

Maren ProPak A160 Auto Tie Baler

sku Product SKU:  Maren ProPak A160 Auto Tie Baler

The Maren ProPak A160 Auto Tie Baler is a fully automatic recycling solution engineered for high-volume operations such as corrugated packaging, printing, tissue, folding carton, and converting. Built for demanding duty cycles, this auto tie baler delivers fewer jams, less cleanups, easier maintenance, heavier bales, and longer equipment life.

With multiple horsepower configurations, customizable hopper sizes, and an advanced automatic tying system, the ProPak A160 can be tailored to meet virtually any production requirement. The ProPak A160 eliminates common issues such as shear jams, material migration, and unnecessary downtime. Its user-friendly touchscreen interface, advanced diagnostics, and user-friendly design help facilities maximize productivity while maintaining safe, efficient operations for years to come.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes recycled corrugated containers, shredded corrugated, folding carton stock, coated stock, shredded paper, steel cans, mixed & office paper, carpet & padding, aluminum cans, ABS plastic, textile, tissue mill broke
  • Fully automatic 5-wire bale tying system with electrically driven inserter and twister
  • Service-friendly access door for easy maintenance repairs
  • Equipped with Allen-Bradley touchscreen controls that provide real-time machine status, bale progress monitoring, and fault diagnostics
  • Ideal for corrugated box plants, folding carton manufacturers, printing facilities, tissue manufacturers, converters, and other high-volume recycling operations

Specifications

Feeding Opening: Width, Length, Depth 27.5”, 30” or 40”, 40”
Main Cylinder 7"
Operating Pressure 4200 PSI
Ram Force 161,635 lbs
Baling Force  134.7 PSI
Horsepower Options Single 20/30, Twin 20/30
No Load Cycle Time 7.7 – 16 secs
No Load Displacement  Up to 18,700 cf/hr
Bale Size 30 x 40 x variable Length
Typical Bale Density  OCC up to 30#/cf
Oil Cooling  Closed loop air cooler with independent circulation pump
PLC Allen-Bradley Micrologix
HMI 10.4” Allen-Bradley Panelview
Floor Liners AR400 replaceable floor liners

Features

  • Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction
  • Hopper sizes adapt with any air conveying system
  • Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints
  • Padlocked service door for secure access only by maintenance
  • Key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability
  • Dual motor models when equipped, allow the operator to select either motor/pump A or B to operate, or allow automatic on demand activation of second motor

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 100 Bulk Wire Feed System
  • Easy Lifting Electric Hoist Wire Loading Boom
  • Conveyor Controls: Allows operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay, and more
  • Full Tank of Oil Shipped with Baler
  • Baler Wire Run Out Sensor
  • 5’ or 10’ Heavy Duty Bale Slide

USD 0.0000

Maren ProPak A285 Auto Tie Shear Baler

sku Product SKU:  Maren ProPak A285 Auto Tie Baler

The Maren ProPak A285 Auto Tie Shear Baler is a fully automatic recycling solution engineered for facilities processing high volumes of corrugated box, folding carton, printing, converting, envelope, tissue products, and other recyclable materials. Designed for demanding environments, the auto tie baler delivers powerful compaction force and high-volume processing capacity to efficiently handle large quantities of recyclable materials. Its heavy-duty design produces dense, high-quality bales while maximizing productivity and minimizing downtime.

Available with multiple horsepower and hopper size configurations, the ProPak A285 can be customized to match specific production requirements and integrate with a variety of air conveying systems. With durable construction, easy service access, advanced safety features, and dependable automatic operation, the Maren ProPak A285 delivers consistent performance for high-volume recycling operations.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes corrugated cardboard, paper, printing waste, tissue products, aluminum cans, plastic film, and molded fiber products
  • Fully automatic auto tie baler design minimizes operator involvement and increases efficiency
  • Easy access maintenance doors
  • Producing dense bales up to 3,000 lbs
  • Equipped with Allen-Bradley touchscreen controls that provide real-time machine status, bale progress monitoring, and fault diagnostics
  • Available in ProPak A265 & ProPak A285 configurations
  • Ideal for distribution centers, warehouses, recycling centers, and printing facilities

Specifications

Feeding Opening: Width, Length, Depth 39.5” or 42.5” (W), 64” or 80” (L), 42” (D)
Main Cylinder 9"
Operating Pressure 4500 PSI
Ram Force 286,315 lbs
Baling Force  151 PSI (45 Wide), 164 PSI (42 Wide)
Bale Weight 3,000 lbs
Horsepower Options Twin 40’s, Twin 50’s, Twin 60’s, Triple 50’s
No Load Cycle Time 7.5 – 10.6 secs
No Load Displacement  Up to 42,000 cf/hr
Bale Size 42 x 42 x Variable or 45 x 42 x Variable
Typical Bale Density  OCC up to 34#/cf
Oil Cooling  Closed loop air cooler with independent circulation pump
PLC Allen-Bradley Micrologix
HMI 10.4” Allen-Bradley Panelview Plus 7 Color Touch Screen
Floor Liners AR400 replaceable floor liners

Features

  • Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction
  • Hopper sizes to adapt with any air conveying system
  • Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints
  • Padlocked service door for secure access only by maintenance
  • Key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 100 Bulk Wire Feed System
  • Easy Lifting Electric Hoist Wire Loading Boom
  • Conveyor Controls: Allows operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay, and more
  • Full Tank of Oil Shipped with Baler
  • Baler Wire Run Out Sensor
  • 10’ Heavy Duty Bale Slide

USD 0.0000

Maren ProPak A265 Auto Tie Baler

sku Product SKU:  Maren ProPak A265 Auto Tie Baler

The Maren ProPak A265 Auto Tie Baler is a fully automatic horizontal baler designed for processing high volumes of recyclable materials. The A265 delivers powerful ram force, producing dense bales weighing up to 3,000 lbs while maintaining reliable, continuous operation.

Featuring an advanced automatic 6-wire tie system, progressive shear blade technology, user-friendly controls, and heavy-duty steel construction, the ProPak A265 is engineered to maximize productivity while minimizing downtime. With Allen-Bradley touchscreen controls, real-time machine monitoring, material presets, and advanced fault diagnostics, operators can easily optimize performance and simplify daily operation. Built for durability and reduced maintenance requirements, the Maren ProPak A265 provides dependable performance for demanding industrial baler applications.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes corrugated cardboard, paper, printing waste, tissue products, aluminum cans, plastic film, and molded fiber products
  • Enhances compaction performance through a dual-motor system that delivers extra power on demand or automatically
  • Easily switch between materials without having to turn the baler off
  • Reduces bale jams for smoother, more reliable operation
  • Available in ProPak A265 & ProPak A285 configurations
  • Ideal for distribution centers, warehouses, recycling centers, and printing facilities requiring a high-performance industrial baler

Specifications

Feeding Opening: Width 39.5” or 42.5”
Feeding Opening: Length 48”, 64”, 80”
Feeding Opening: Depth 42”
Main Cylinder 9"
Operating Pressure 4200 PSI
Ram Force 267,192 lbs
Baling Force  141 PSI (45 Wide), 151 PSI (42 Wide)
Horsepower Options Twin 30’s
No Load Cycle Time 15 sec - 20.4 sec
No Load Displacement  Up to 14,400 cf/hr
Bale Size 42 x 42 x Variable or 45 x 42 x Variable
Typical Bale Density  OCC up to 33#/cf
Oil Cooling  Closed loop air cooler with independent circulation pump
PLC Allen-Bradley Micrologix
HMI 10.4” Allen-Bradley Panelview Plus 7 Color Touch Screen
Floor Liners AR400 replaceable floor liners

Features

  • Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction
  • Hopper sizes adapt with any air conveying system
  • Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints
  • Padlocked service door for secure access only by maintenance
  • Key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability
  • Dual motor models when equipped, allow the operator to select either motor/pump A or B to operate, or allow automatic on demand activation of second motor

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 100 Bulk Wire Feed System
  • Easy Lifting Electric Hoist Wire Loading Boom
  • Conveyor Controls: Allows operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay, and more
  • Full Tank of Oil Shipped with Baler
  • Baler Wire Run Out Sensor
  • 10’ Heavy Duty Bale Slide

USD 0.0000

Maren ProPak A225 Auto Tie Baler

sku Product SKU:  Maren ProPak A225 Auto Tie Baler

The Maren ProPak A225 Auto Tie Baler is a fully automatic horizontal baler designed for facilities processing high volumes of recyclable materials. Utilizing Maren's exclusive single-cylinder "A" Frame tension chamber, the A225 maximizes ram force during full-pressure baling to produce dense bales weighing over 2,500 lbs.

Featuring an advanced automatic 6-wire tie system, powerful shear blade technology, user-friendly touchscreen controls, and customizable hopper configurations, the industrial baler is designed to maximize productivity while minimizing downtime. The ProPak A225 is a durable, low-maintenance baler that delivers dependable performance for years to come.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes aluminum cans, newsprint, plastic film
  • Reduces bale jams for smoother, more reliable operation
  • Equipped with user-friendly controls to monitor real-time machine status, bale progress monitoring, and fault diagnostics
  • Easily switch between materials without having to turn the baler off
  • Available in two configurations: ProPak A225 or ProPak A210
  • Ideal for recycling centers, paper processors, warehouses, distribution centers, and manufacturing facilities

Specifications

Feeding Opening: Width 33.5" or 39.5"
Feeding Opening: Length 48" or 64"
Feeding Opening: Depth 42”
Main Cylinder 8"
Operating Pressure 4500 PSI
Ram Force 226,195 lbs
Baling Force  150 PSI (36 Wide), 128 PSI (42 Wide)
Horsepower Options Twin 40’s or Twin 50’s
No Load Cycle Time 6.6 secs. to 7.6 secs
No Load Displacement  Up to 30,315 cf/hr
Bale Size 36 x 42 x Variable or 42 x 42 x Variable
Typical Bale Density  OCC up to 32#/cf
Oil Cooling  Closed loop air cooler with independent circulation pump
PLC Allen-Bradley Micrologix
HMI 10.4” Allen-Bradley Panelview Plus 7 Color Touch Screen
Floor Liners AR400 replaceable floor liners

Features

  • Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction
  • Enhances compaction performance through a dual-motor system that delivers extra power on demand or automatically
  • Easy access for maintenance points
  • Hopper sizes to adapt with any air conveying system
  • Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints
  • Padlocked service door for secure access only by maintenance
  • Key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 100 Bulk Wire Feed System
  • Easy Lifting Electric Hoist Wire Loading Boom
  • Conveyor Controls: Allows operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay, and more
  • Full Tank of Oil Shipped with Baler
  • Baler Wire Run Out Sensor
  • 10’ Heavy Duty Bale Slide

USD 0.0000

Maren ProPak A210 Auto Tie Baler

sku Product SKU:  Maren ProPak A210 Auto Tie Baler

The Maren ProPak A210 Auto Tie Baler is a fully automatic horizontal baler designed for facilities with steady high volumes of recyclable materials. Utilizing Maren's exclusive single-cylinder "A" Frame tension chamber, the A210 maximizes ram force during full-pressure baling to produce dense bales weighing up to 2,500 lbs while maintaining reliable, continuous operation.

Featuring an advanced automatic 6-wire tie system, shear blade technology, customizable hopper configurations, and Allen-Bradley touchscreen controls, the automatic baler is engineered to maximize productivity while minimizing downtime. Built with heavy-duty steel construction, advanced fault diagnostics, and maintenance-friendly service access, the ProPak A210 delivers dependable performance for demanding industrial baler applications.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes aluminum cans, newsprint, plastic film
  • Reduces bale jams for smoother, more reliable operation
  • Equipped with user-friendly controls to monitor real-time machine status, bale progress monitoring, and fault diagnostics
  • Easily switch between materials without having to turn the baler off
  • Available in two configurations: ProPak A225 or ProPak A210
  • Ideal for recycling centers, paper processors, warehouses, distribution centers, and manufacturing facilities

Specifications

Feeding Opening: Width 33.5" or 39.5"
Feeding Opening: Length 48" or 64"
Feeding Opening: Depth 42”
Main Cylinder 8"
Operating Pressure 4200 PSI
Ram Force 211,115 lbs
Baling Force  140 PSI (36 Wide), 120 PSI (42 Wide)
Horsepower Options Single 20/30 HP, Twin 20/30 HP
No Load Cycle Time 12 secs to 27 secs
No Load Displacement  Up to 16,065 cf/hr
Bale Size 36 x 42 x Variable or 42 x 42 x Variable
Typical Bale Density  OCC up to 32#/cf
Oil Cooling  Closed loop air cooler with independent circulation pump
PLC Allen-Bradley Micrologix
HMI 10.4” Allen-Bradley Panelview Plus 7 Color Touch Screen
Floor Liners AR400 replaceable floor liners

Features

  • Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction
  • Enhances compaction performance through a dual-motor system that delivers extra power on demand or automatically
  • Easy access for maintenance points
  • Hopper sizes to adapt with any air conveying system
  • Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints
  • Padlocked service door for secure access only by maintenance
  • Key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • 100 Bulk Wire Feed System
  • Easy Lifting Electric Hoist Wire Loading Boom
  • Conveyor Controls: Allows operator to select upper or lower photo eye activation, run, jog, stop, conveyor auto stop delay, and more
  • Full Tank of Oil Shipped with Baler
  • Baler Wire Run Out Sensor
  • 10’ Heavy Duty Bale Slide

USD 0.0000

Maren ProPak 2R175 Two Ram Baler

sku Product SKU:  Maren ProPak 2R175 Two Ram Baler

The Maren ProPak 2R175 Two Ram Baler is a fully automatic recycling solution for facilities processing high volumes of recyclable materials. With an extra-large feed hopper, it easily accommodates oversized items such as refrigerator boxes, Gaylord containers, etc. The industrial baler eliminates common issues such as material pre-conditioning requirements, bale jams, and system shock, helping maximize shear performance and keep operations running smoothly.

Equipped with advanced operator controls, it provides real-time bale tracking, stored material-specific settings, and maintenance reminders with password protection. With its rugged construction, automated operation, and user-friendly controls, the Maren ProPak 2R175 automatic baler delivers dependable performance for years to come!

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes aluminum cans, tin cans, molded fiber products, plastic film, recycled corrugated containers, steel cans, PET and HDPE bottlesr
  • Delivers 175,000 lbs of ram face pressure, providing up to 15% more compaction force than comparable balers equipped with 8-inch cylinders
  • Fast 40 second cycle time
  • Equipped with Bale Separation door to eliminate contaminated bales and accommodate overcharges
  • Customizable color options to fit your specific operations
  • Ideal for recycling facilities, distribution centers, warehouses, and material recovery operations

Specifications

Motor 20 hp, TEFC 3 Phase
Hydraulic System 3,000 psi, 3,500 psi (max system pressure)
Piston Pump 3,000 psi, 5,100 psi (max)
Hydraulic Oil Reservoir (gal) 180 gal
Platen Force 175,000 lbs
Platen Pressure 102 psi
Cycle Time  31.6 sec(short), 40 sec (full)
Bale Size (L  x W x H) 60”, 38” – 51”, 30”
Wide Box (L x W) 78” x 54”
Bale Separation Door 13"
Chassis Height (with conveyor) 151 – ¼”
Chassis Height (without conveyor) 84 – ¼”
Chassis Width (without bale table) 179"
Chassis Length (without conveyor) 291"
Baler Shipping Weight 29,100 lbs
Construction Single-sheet steel chassis floor, sides, and top
Ram Positioning Laser-based (no moving limit switches)
Saftey Monitoring  Redundant E-Stop monitoring system

Need ties for your bales? Check out our baling wire and twine supplies!

Features

  • Interlocking construction; stress is barred on steel not welds
  • Abrasion-resistant AR400 hardened wear liners eliminate costly floor replacements
  • Advanced high pressure hydraulic

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • Smart Bale Intelligent Control: Mobile app that easily allows you to monitor bale size and statistics, read messages, clear jams and change materials safely from the seat of your loader
  • Shipped with 180 gallons full of oil for hydraulic oil reservoir
  • 30 Hp Motor

USD 0.0000

Maren ProPak 2R185 Two Ram Baler

sku Product SKU:  Maren ProPak 2R185 Two Ram Baler

The Maren ProPak 2R185 Two Ram Baler is a fully automatic two ram baler designed for facilities processing high volumes of recyclable materials. With an extra large feed hopper, the automatic baler can be configured for gravity, pneumatic, or belt conveyor automatic feed devices, allowing seamless integration into existing operations.

Featuring advanced operator controls, maintenance reminders, laser-based ram positioning, and emergency stop systems, the ProPak 2R185 is built to improve safety while reducing unnecessary maintenance, delivering dependable performance for demanding industrial baler applications.

Looking for a different fit? Browse our full range of horizontal balers to compare models.

Key Benefits

  • Processes shredded stock, OCC, molded fiber products, newsprints, paper, tissue mill broke, paper & wood dust, textile, foam, PET & HDPE bottles, ABS plastic, plastic film, aluminum cans, steel cans, carpet or padding, radiators, aluminum and copper wire
  • 20% more compaction force than comparable balers equipped with 8-inch cylinders
  • Easily switch between materials without contamination
  • Increased bale density and easy transport
  • Ideal for MRFs, recycling facilities, distribution centers, paper processors, and high-volume industrial operations

Specifications

Motor 20 hp, TEFC 3 Phase
Hydraulic System 4,100 psi regenerative, 4,500 psi (max system pressure)
Piston Pump 4,200 psi, 5,100 psi (max)
Hydraulic Oil Reservoir (gal) 150 gal
Platen Force 187,000 lbs
Platen Pressure 109 psi
Cycle Time  18.5 sec(short), 28 sec (full)
Bale Size (L  x W x H) 60”, 38” – 51”, 30”
Wide Box (L x W) 48” x 54”
Chassis Height (with conveyor) 124"
Chassis Height (without conveyor) 77"
Chassis Width (without bale table) 206"
Chassis Length (without conveyor) 214"
Baler Shipping Weight 28,100 lbs
Wire Tie System Accent 470 or L.P. Pinnacle II
Construction Single-sheet steel chassis floor, sides, and top
Ram Positioning Laser-based (no moving limit switches)

Features

  • Interlocking construction; stress is barred on steel not welds
  • Abrasion resistant AR400 hardened wear liners eliminate costly floor replacements
  • Progressive shear cuts material over a distance, allowing difficult materials to process without jams
  • Advanced high pressure hydraulics

JWR also offers professional installation and planned maintenance services to keep your baler running at peak performance.

Compatible Options

  • Smart Bale Intelligent Control: Mobile app that easily allows you to monitor bale size and statistics, read messages, clear jams and change materials safely from the seat of your loader
  • Can be shipped with 180 gallons full of oil for hydraulic oil reservoir
  • 30 Hp Motor

USD 0.0000

Refurbished Max Pak 6020-7 Vertical Baler

sku Product SKU:  34456

The Max-Pak MP6020-7 Vertical Baler is a durable, high-performance recycling solution designed to efficiently process a wide range of recyclable materials up to 1,200 lbs. Engineered for long-lasting reliability, the MP6020-7 features heavy-duty structural components and a user-friendly design that helps maximize productivity while minimizing maintenance requirements.

Every refurbished vertical baler at JWR is carefully rebuilt and thoroughly inspected to meet our quality standards, providing the performance and reliability of a proven machine at a more economical price point. This baler delivers dependable performance for commercial and industrial recycling applications. 

Key Benefits

  • Fast 65-second cycle time
  • Easily & faster tightens the bale door with 10-inch ratchet wheel
  • Customizable color options to fit your specific operations
  • Heavy-duty construction designed for years of reliable operation
  • Easy-access side-mounted power unit simplifies maintenance and servicing
  • Processes wide range of recyclable materials: cardboard, shredded newspaper, aluminum cans, PET plastics
  • Ideal for warehouses, distribution centers, retail locations, and recycling facilities

Current Inventory

  • In Stock: 1

Specifications

Bale Size 30” x 48” x 60”
Bale Weight Up to 1,200 lbs 
Cycle Time 65 seconds
Electric Motor 20 hp
Voltage 208/230/460v, 3 phase
Pump 16.1 GPM
Cylinder Bore/Rod/Stroke 7", 4.5", 66"
System Pressure 2,350 PSI
Ram Pressure 90,438 lbs
Platen Pressure 55.69 psi
Oil Capacity 41 gallons
Shipping Weight  6,700 lbs

Features

  • Vertical Side Mount power unit allows most service points to be accessed without a ladder
  • Smooth platen roller guides
  • Tube steel reinforces the discharge door and maintains the integrity of the bale chamber
  • Exceptional structural strength: header beams & side channels
  • Subfloor constructed with four 4-inch tube steel supports for a strong, durable foundation
  • Spring-loaded bale retention

USD 0.0000

Plum Creek Environmental K-Pac Front Load Compactors

sku Product SKU:  K-Pac FL Compact

The K-PAC Front Load Compactor is designed to provide efficient waste collection, simple operation, and reliable performance for small businesses, apartment complexes, etc. The K-PAC compactors make waste handling safer, easier, and more productive for daily operations.

Built with operator safety and convenience in mind, K-PAC compactors include interlocked safety systems that prevent operation while the loading lid is open, an emergency stop button for immediate shutdown, and key-controlled access for added security. The K-PAC compactors deliver dependable performance and years of reliable service. 

Key Benefits

  • Low loading height for easy accessibility
  • Customizable Weatherproof power unit options: Three Phase or Single Phase
  • Easy dumping with quick-release lid hold-down latches
  • 22-second cycle time
  • Backed by 3-2-1 warranty (3 years structure, 2 years parts, 1 year labor)
  • Ideal for smaller scale or space-restricted areas

Specifications

Manufacturer’s Rating 1.00 y3
Ram Face  53" W x 46” H
Clear Top Opening  27.5” x 53.5”
Loading Height  40"
Ram Penetration 13"
Packing Force Normal 25,400 lbs
Packing Force Max 28,200 lbs
Packing Pressure Normal 1,800 PSI
Packing Pressure Max 2,000 PSI
Container Capacity 6 cu yd
Overall Dimensions 140” L x 78” W x 61” H
Power Pack Cover Protective Metal Cover with Hydraulic Hose Storage Slot
Motor 5 HP, 3PH, TEFC
Control Panel 208/230/460 Volts 3 Phase 60 Hertz, Key Start Switch & Stop Buttons
Hydraulic Pump 6 GPM
Reservoir 15 gallons 
Hydraulic Hoses 12” with Quick Hydraulic Couplers
Cylinders 2 - 3” x 16”

Features

  • Spring assisted loading chamber lid
  • Lockable charge lid for controlled access
  • Compaction cycle stops if loading chamber opened
  • Emergency stop button that will halt operation at any time in the compaction cycle

Compatible Options

  • Weatherproof power unit: Three Phase or Single Phase

USD 0.0000

Plum Creek Environmental K-Pac Rear Load Compactors

sku Product SKU:  K-Pac Rear Load

The K-PAC Front Load Compactor is designed to provide efficient waste collection, simple operation, and reliable performance for small businesses, apartment complexes, etc. The K-PAC compactors make waste handling safer, easier, and more productive for daily operations.

Built with operator safety and convenience in mind, K-PAC compactors include interlocked safety systems that prevent operation while the loading lid is open, an emergency stop button for immediate shutdown, and key-controlled access for added security. The K-PAC compactors deliver dependable performance and years of reliable service. 

Key Benefits:

  • Low loading height for easy accessibility
  • Customizable Weatherproof power unit options: Three Phase or Single Phase
  • Easy dumping with quick-release lid hold-down latches
  • 22-second cycle time
  • Backed by 3-2-1 warranty (3 years structure, 2 years parts, 1 year labor)
  • Ideal for smaller scale or space-restricted areas

Specifications:

Manufacturer’s Rating 1.00 y3
Ram Face  53" W x 46” H
Clear Top Opening  27.5” x 53.5”
Loading Height  40"
Ram Penetration 13"
Packing Force Normal 25,400 lbs
Packing Force Max 28,200 lbs
Packing Pressure Normal 1,800 PSI
Packing Pressure Max 2,000 PSI
Container Capacity 6 cu yd
Overall Dimensions 140” L x 78” W x 61” H
Power Pack Cover Protective Metal Cover with Hydraulic Hose Storage Slot
Motor 5 HP, 3PH, TEFC
Control Panel 208/230/460 Volts 3 Phase 60 Hertz, Key Start Switch & Stop Buttons
Hydraulic Pump 6 GPM
Reservoir 15 gallons 
Hydraulic Hoses 12” with Quick Hydraulic Couplers
Cylinders 2 - 3” x 16”

Features:

  • Spring assisted loading chamber lid
  • Lockable charge lid for controlled access
  • Compaction cycle stops if loading chamber opened
  • Emergency stop button that will halt operation at any time in the compaction cycle

Compatible Options

  • Weatherproof power unit: Three-Phase or Single-Phase

USD 0.0000

Refurbished Sebright 5260-2 Pre-Crusher Compactor

sku Product SKU:  25930

The Sebright 5260-2 Pre-Crusher compactor delivers powerful waste reduction and product destruction capabilities. With exceptional crushing power, rugged construction, flexible operating modes, and multiple installation configurations, the Sebright Pre-Crusher is built to withstand the toughest waste streams.

Every refurbished compactor at JWR is carefully rebuilt and thoroughly inspected to meet our quality standards, providing the performance and reliability of a proven machine at a more economical price point. Whether crushing pallets, drums, or other bulky materials, this system maximizes container density, eliminates material memory, and helps facilities achieve greater efficiency, security, and cost savings in their waste handling operations. 

Key Benefits

  • 2 cubic yard chamber capacity
  • Adjustable force settings optimize performance for a wide range of waste materials
  • Prevents material from wedging in the guide tracks
  • Optional bypass pre-crusher feature
  • Waste material is reduced to a fraction of the original volume
  • Customizable color options to fit your specific operations
  • Ideal for retail stores, manufacturing & recycling facilities, etc

Current Inventory

  • In Stock: 1

Specifications

Cu. Yd. 2
Motor Pump 30
Pump GPM 20/43
No. of Cylinders 2
Cylinder Bore 6
Cylinder Stroke 68
Max PSI 2,000
Ram Face Sq. Inch 1,530
Resultant Ram Force 74
Cylinder Force 113,100
Cycle Time 57
Cub. Yd. 126.3
Resevior Gallon 140
Base Unit Weight (lbs) 21,340

Features

  • 5 Inch solid steel wall - with 2” thick steel guide plates on each side
  • Long Motor Life - T.E.F.C. (Totally Enclosed Fan Cooled)
  • High Tech PLC driven control panel
  • Extra heavy duty frame and ram: heavy structural plate with ship and car channel construction
  • AR floor and sides (Abrasive Resistant AR 235 Alloy)
  • Nylatron guide shoes; 3 shoes each side

USD 0.0000

Refurbished Sebright 4660 Compactor

sku Product SKU:  Sebright 4660 Compactor

Sebright 4660 Industrial Compactor is engineered with heavy-duty components and advanced compaction technology to maximize payloads and improve operational efficiency. Designed for reliability and long service life, the 4660 features a powerful hydraulic system, deep container penetration, and durable abrasion-resistant construction to deliver exceptional compaction performance in demanding environments.

Every refurbished compactor at JWR is carefully rebuilt and thoroughly inspected to meet our quality standards, providing the performance and reliability of a proven machine at a more economical price point. The Sebright 4660 helps reduce hauling costs, increase container payloads, and provide dependable day-to-day operation for commercial, industrial, and recycling facilities. 

Key Benefits:

  • 45 second cycle time
  • 2 cubic yard capacity
  • Up to 56,550 lbs of compaction force to maximize waste handling
  • Large top opening for easy access to fit bulky materials
  • Equipped with operator safety features
  • Ideal for solid waste, commercial garbage, and recyclable materials

Current Inventory:

  • In Stock: 1
  • In Process To Be Rebuilt: 2

Specifications:

Cu. Yd 2.0
Motor HP 10
Pump GPM 16
No. of Cylinder(s) 1
Cylinder Bore 6
Cylinder Stroke 68
Max PSI 2,000
Ram Face Sq. Inch 1,680
Ram Face PSI 34
Cylinder Force  56,550
Cycle Time 45 seconds
Cu. Yd. Hour 132
Hyd. Res. (Gal) 36
Base Unit Weight (lbs) 5,950

Features:

  • Abrasive-resistant floor (AR 235)
  • High-performance cylinder(s) and power unit combinations
  • Large Cylinder 6” Design
  • Long motor life (T.E.F.C.) Totally Enclosed Fan Cooled
  • Deep container penetration
  • Remote station (Operator station) with container full light and Keylock
  • Liquid-filled pressure gauge
  • Auto cycle / Multi Cycle/Emergency Stop/Deadman Selector Switch
  • UL Listed Panel/ANSI 245.2 Compliant
  • 800 lb. capacity walk-on deck (tread plate)
  • Panel-mounted Jog Controls
  • Breaker Bar Teeth

USD 0.0000

Sebright 12084T-2-7 Transfer Station Compactor

sku Product SKU:  Transfer Station 12084T-2-7

The Seabright Transfer Station Compactor 12084T-2-7 is engineered to maximize efficiency and productivity in high-volume waste handling operations. Designed to deliver exceptional compaction force and dependable performance, this heavy-duty machine helps transfer stations increase payloads, reduce operating costs, and maintain cleaner, more efficient facilities.

With two 7-inch hydraulic cylinders producing 169,334 lbs of force, the 12084T-2-7 is engineered to handle the toughest waste transfer applications. Its rugged construction and low-maintenance design support continuous operation while minimizing downtime, delivering reliable performance year after year. The 12084T-2-7 provides the power, durability, and efficiency needed to get the job done. 

Key Benefits:

  • Reduces labor and fuel costs
  • Available in two different models (12084T-2-6 or 12084T-2-7) to meet operational requirements
  • Increases hauling efficiency
  • Low-maintenance design minimizes downtime and operating expenses
  • Customizable Options: Scissor lock & Ram power wedge to increase material density
  • Primed and painted in a variety of colors to meet customer preferences
  • Backed by 3- year warranty
  • Ideal for municipal and commercial transfer stations and large recycling facilities

Specifications:

Factory Rating  10 cu. yd
Motor HP 60 HP
Pump GPM 130 GPM
Reservoir Capacity 300 gallons
Hydraulic Cylinders (2) 7"
Max PSI 2,200
Max Ram Force 169,334 lbs
Ram Force 84" x 30.5"
Max Ram Face PSI 66.1
Cycle Time 35 seconds
Cubic Yards/Hr. (up to) 950
Discharge Opening  86" x 49"
Ram Penetration  32.25"(STND.) 44.25" (PW)
Clear Top Opening  80" x 114"
Top Opening  84" x 120"
Overall Height (Without Stand) 76.5"

Features:

  • Large chamber to reduce "bridging"
  • Ram power wedge to increase material density
  • High ram penetration to reduce spillage
  • Three-sided snout extensions standard on all models
  • Industrial built
  • Criss-cross reinforcement rams
  • Large oil reservoirs
  • Site gage with thermometer temperature
  • Vane hydraulic pumps
  • Remote pendant controls with mounted options
  • ANSI rated
  • Stainless steel ram guide railings
  • Heavy duty cylinders
  • C-Face adapters
  • TEFC Motors
  • 2 wire braided hoses

Compatible Options:

  • Optional Add-ons: Scissor Lock & Ram Power Wedge to increase material density
  • Three Sided Snout Extensions Standard

USD 0.0000

Refurbished Sebright 5060 Energy Efficient Compactor

sku Product SKU:  Refurbished Sebright 5060 Compactor

The Sebright Energy Efficient Compactor Model 5060 is engineered to handle high volumes of waste with maximum efficiency. Designed with powerful packing force and deep ram penetration, this durable compactor reduces bulky trash and waste to a fraction of its original volume, helping facilities minimize waste handling and disposal costs.

Every refurbished compactor at JWR is carefully rebuilt and thoroughly inspected to meet our quality standards, providing the performance and reliability of a proven machine at a more economical price point. The Sebright Model 5060 delivers dependable service, improves efficiency, reduces waste volume, and maintains cleaner operations for daily use! 

Key Benefits

  • 2.5 cu yard capacity
  • Large top opening for easy access to fit bulky materials
  • Up to 56,550 lbs of compaction force to maximize waste handling
  • Backed by a 6-month warranty
  • Automatic full/Jam shut off buttons
  • Customizable color options to fit your specific operations
  • Ideal for offices, motels/hotels, hospitals, restaurants, warehouses, truck terminals, etc

Current Inventory

  • In Process To Be Rebuilt: 1

Specifications

Cu. Yd. 2.5
Motor Pump 10
Pump GPM 13/3
No. of Cylinders 1
Cylinder Bore 6"
Cylinder Stroke 68
Max PSI 2,000
Ram Face Sq. Inch 1,590
Resultant Ram Force 36
Cylinder Force 56,550
Cycle Time 55 seconds
Cu. Yd. Hour 140
Hyd. Resevoir Gallons 36
Base Unit Weight (lbs) 4,950

Features

  • Abrasive resistant floor (AR 235)
  • Highly visual oil sight gauge with thermometer
  • Exact alignment pump/motor mount C-face
  • Long motor life (T.E.F.C)
  • Deep container penetration, full 16”
  • Underwriter Laboratories listed components

FOB: Johnson Creek, WI

USD 0.0000

Sebright Pre-Crusher Compactor

sku Product SKU:  Pre-Crusher Compactor (2.5 - 7 cubic yard chamber)

The Sebright Pre-Crusher compactor delivers powerful waste reduction and product destruction capabilities with compaction forces of up to 113,100 pounds. With exceptional crushing power, rugged construction, flexible operating modes, and multiple installation configurations, the Sebright Pre-Crusher is built to withstand the toughest waste streams.

Whether crushing pallets, drums, or other bulky materials, this system maximizes container density, eliminates material memory, and helps facilities achieve greater efficiency, security, and cost savings in their waste handling operations. The Sebright Pre-crusher is the ideal solution for high-volume compaction and reliable product destruction. 

Key Benefits:

  • 2 – 8 cubic yard chamber capacity
  • Adjustable force settings optimize performance for a wide range of waste materials
  • Prevents material from wedging in the guide tracks
  • Waste material is reduced to a fraction of the original volume
  • Available in a variety of configurations to fit your specific needs
  • Optional bypass pre-crusher feature
  • Ideal for retail stores, manufacturing & recycling facilities, etc

Specifications:

Motor HP 20
Pump GPM 30
Cylinder Size  6" x 68"
Max PSI 2,000
No. of Cylinder(s) 1
Cylinder Bore 6"
Cylinder Force 56,540
Cycle Time 38 seconds
Cu. Yd. Hour 118
Weight (lbs) 20,640
  • Multiple different sizes and powers for all needs (See literature for more)

Features:

  • 5 Inch solid steel wall - with 2” thick steel guide plates on each side
  • Long Motor Life - T.E.F.C. (Totally Enclosed Fan Cooled)
  • High-tech PLC-driven control panel
  • Extra heavy-duty frame and ram - heavy structural plate with ship and car channel construction
  • AR floor and sides (Abrasive Resistant AR 235 Alloy)
  • Nylatron guide shoes; 3 shoes each side

Compatible Options

  • 5260PC-1-6
  • 5260PC-2-6
  • 7460PC-1-6
  • 7460PC-1-7HD
  • 7460PC-2-6
  • 9860PC-2-6
  • 12860PC-2-6
  • 12880PC-2-6

USD 0.0000

Sebright Model 9884T Transfer Station Compactor

sku Product SKU:  Transfer Station Compactor 9884T (8 cubic yard)

The Sebright Transfer Station Compactor is engineered to maximize payloads while reducing transportation and operating costs. Designed to compact waste directly into semi-trailers, this heavy-duty unit minimizes downtime and delivers reliable, efficient daily performance.

Built for demanding, high-volume applications, the transfer compactor is an ideal solution for municipalities and commercial transfer stations, recycling facilities, and other industries that need dependable and cost-effective waste transfer and handling. 

Key Benefits:

  • Reduced downtime and improves productivity through durable, reliable design
  • Lower maintenance requirements and operating costs
  • Customizable Options: Scissor lock & Ram power wedge to increase material density
  • Backed by 3- year warranty
  • Primed and painted in a variety of colors to meet customer preferences
  • Ideal for food service & hospitality, grocery & food retail, industrial manufacturing, medical facilities, municipal operations, transfer station, recycling & recovery facilities

Specifications:

Factory Rating  8 cu. yd
Motor HP 50 HP
Pump GPM 63 GPM
Reservoir Capacity 200 gallons
Hydraulic Cylinders (2) 6"
Max PSI 2,200
Max Ram Force 124,410 lbs
Ram Force 84" x 30.5"
Max Ram Face PSI 44.1
Cycle Time 39 seconds
Cubic Yards/Hr. (up to) 690
Discharge Opening  86" x 49"
Ram Penetration  24.5"
Clear Top Opening  86" x 90"
Top Opening  84" x 98"
Overall Height (Without Stand) 76.5"

Features:

  • High ram penetration to reduce spillage
  • Large chamber to reduce “Bridging”
  • Three sided snout extensions standard on all models
  • Industrial built
  • Criss-cross reinforcement rams
  • Large oil reservoirs
  • Site gage with thermometer temperature
  • Vane hydraulic pumps
  • Remote pendant controls with mounted options
  • ANSI rated
  • Stainless steel ram guide railings
  • Heavy-duty cylinders
  • C-Face adapters
  • TEFC Motors
  • 2 wire braided hoses

Compatible Options:

  • Optional Add-ons: Scissor Lock & Ram Power Wedge to increase material density
  • Three-Sided Snout Extensions Standard

USD 0.0000

Sebright Model 12084T-2-6 Transfer Station Compactor

sku Product SKU:  Transfer Station Compactor 12084T (9 cubic yard)

The Sebright Transfer Station Compactor 12084T-2-6 is engineered to maximize efficiency and productivity in high-volume waste handling operations. Designed to deliver exceptional compaction force and dependable performance, this heavy-duty machine helps transfer stations increase payloads, reduce operating costs, and maintain cleaner, more efficient facilities.

With two 6-inch hydraulic cylinders producing 124,410 lbs of force, it’s built for demanding applications that require continuous operation and limited maintenance. The 12084T-2-6 is the answer to your issues and provides years of reliable service! 

Key Benefits:

  • Reduces labor and fuel costs
  • Available in two different models (12084T-2-6 or 12084T-2-7) to meet operational requirements
  • Increases hauling efficiency
  • Low-maintenance design minimizes downtime and operating expenses
  • Customizable Options: Scissor lock & Ram power wedge to increase material density
  • Primed and painted in a variety of colors to meet customer preferences
  • Backed by 3- year warranty
  • Ideal for municipal and commercial transfer stations and large recycling facilities

Specifications:

Factory Rating  10 cu. yd
Motor HP 50 HP
Pump GPM 84 GPM
Reservoir Capacity 300 gallons
Hydraulic Cylinders (2) 6"
Max PSI 2,200
Max Ram Force 124,410 lbs
Ram Force 84" x 30.5"
Max Ram Face PSI 48.6
Cycle Time 36 seconds
Cubic Yards/Hr. (up to) 950
Discharge Opening  86" x 49"
Ram Penetration  32.25"(STND.) 44.25" (PW)
Clear Top Opening  80" x 114"
Top Opening  84" x 120"
Overall Height (Without Stand) 76.5"

Features:

  • Large chamber to reduce "bridging"
  • High ram penetration to reduce spillage
  • Three-sided snout extensions standard on all models
  • Industrial built
  • Criss-cross reinforcement rams
  • Large oil reservoirs
  • Site gage with thermometer temperature
  • Vane hydraulic pumps
  • Remote pendant controls with mounted options
  • ANSI rated
  • Stainless steel ram guide railings
  • Heavy duty cylinders
  • C-Face adapters
  • TEFC Motors
  • 2 wire braided hoses

Compatible Options

  • Optional Add-ons: Scissor Lock & Ram Power Wedge to increase material density
  • Three Sided Snout Extensions Standard

USD 0.0000

Sebright 12680T-2-7-170-PW Transfer Station Compactor

sku Product SKU:  Transfer Station Compactor 12680T-2-7-170-PW (13 c

The Sebright Transfer Station Compactor 2680T-2-7-170-PW is engineered for high-performance waste and recycling transfer operations. Built with extra heavy-duty reinforced steel, this transfer station compactor is designed to withstand the demands of high-volume facilities while delivering exceptional compaction power, efficiency, and long service life.

With customizable options, it meets your specific operational needs. Its large chamber design reduces bridging, while deep ram penetration ensures efficient material transfer and consistent performance. The Transfer Station Compactor helps operators reduce transportation costs, improve payload capacity, and minimize material spillage. 

Key Benefits:

  • Reduced spillage from high ram penetration
  • Delivers reliable, low-maintenance performance for years of service
  • Helps reduce hauling, fuel, and operating costs
  • Customizable Options: Scissor lock
  • Backed by 3-year warranty
  • Ideal for high-volume waste and recycling transfer trailer facilities

Specifications:

Factory Rating  14 cu. yd
Motor HP 60 HP
Pump GPM 108 GPM
Reservoir Capacity 300 gallons
Hydraulic Cylinders (2) 7"
Max PSI 2,200
Max Ram Force 169,334 lbs
Ram Force 84" x 48"
Max Ram Face PSI 44.1
Cycle Time 47 seconds
Cubic Yards/Hr. (up to) 1,150
Discharge Opening  84" x 73"
Ram Penetration  54"
Clear Top Opening  76" x 126"
Top Opening  80" x 126"
Overall Height (Without Stand) 100"

Features:

  • Ram power wedge to increase material density
  • Large chamber to reduce “Bridging”
  • Primed and painted in a variety of colors to meet customer preferences
  • Three-sided snout extensions standard on all models
  • Industrial built
  • Criss-cross reinforcement rams
  • Large oil reservoirs
  • Site gage with thermometer temperature
  • Vane hydraulic pumps
  • Remote pendant controls with mounted options
  • ANSI rated
  • Stainless steel ram guide railings
  • Heavy duty cylinders
  • C-Face adapters
  • TEFC Motors
  • 2 wire braided hoses

Compatible Options:

  • Optional Add-ons: Scissor Lock
  • Three-Sided Snout Extensions Standard

USD 0.0000

Sebright D30 EPS Densifier

sku Product SKU:  Sebright D30 Densifier

The Sebright D30 EPS Densifier is a continuous-feed foam recycling solution designed to efficiently process large volumes of Expanded Polystyrene (EPS) waste. Commonly known as Styrofoam™ (a trademark of Dow Chemical), EPS is widely used in packaging, food service products, and building insulation due to its lightweight properties and excellent insulating value.

Designed for demanding recycling and waste reduction applications, the D30 transforms loose foam into dense, stackable blocks that are easier to handle, store, and transport. Operating without heat, the densifier eliminates harmful fumes while reducing energy consumption, providing a cleaner and more cost-effective recycling solution. With customizable options, the D30 can be integrated with a pre-breaker, bag houses, and conveyor system. The Sebright D30 EPS Densifier helps organizations improve sustainability efforts, lower disposal costs, and divert more waste from landfills. 

Key Benefits

  • Reduces EPS foam volume by up to 50:1
  • Efficient with high-volume processing
  • Operates without heat, eliminates toxic fumes, no odor, and reduces energy consumption
  • Customizable integration: Baghouses, pre-breaker, conveyor
  • Ideal for recycling centers and large distribution facilities

Specifications

Chamber Volume (cu. ft) 2
Motor  15 hp
Cylinder (diameter) (1) 6"
Ram Force (psi) 490 psi
Total Force  71,000 lbs 
Feed Capacity (lbs/hr) Up to 300
Compaction Ration Up to 50:1
Output Density (lbs/ft) 16 - 22
Base Machine Weight 3,700 lbs 
Power Unit Weight  1,250 lbs 

Features

  • Integral dust collection port
  • Sealed design and clean operation
  • PLC-operated Automatic Density Control System (ADCS)
  • Densified Expanded Polystyrene Foam full truckload weights
  • Does Not Melt EPS
  • Two Line Operator Display
  • Automated Density Control System
  • Forcefeeder Included

Compatible Options

  • Integrates with Pre-breaker, Baghouses, and conveyor
  • Automatic Discharge Shear

USD 0.0000

Sebright EPS Pre-Breaker Model PBX2

sku Product SKU:  Sebright Prebreaker

The Sebright EPS Pre-Breaker Model PBX2 is a high-capacity, durable, user-friendly solution designed to efficiently process large EPS (expanded polystyrene) materials before densification. Engineered to handle up to 2,000 cubic feet of EPS per hour, the PBX2 helps maximize densifier performance while reducing material volume and improving overall recycling efficiency.

Designed to be the ideal companion to the Sebright EPS Densifier, the PBX2 aids in reducing installation time while keeping work areas cleaner with its integral discharge and cleanup blowers. With heavy-duty components and user-friendly operation, the PBX2 delivers reliable performance and efficient material handling. 

Key Benefits

  • Processes up to 2,000 cubic feet of EPS material per hour
  • Reduces material jams and keeps workplaces clean
  • Accepts EPS material up to 48” wide
  • Reduces airborne particles and dust with cleanup blower
  • Integrates with Sebright EPS Densifier

Specifications

Throughput cu.ft/hr 2,000
Drive(s) 2 @ 5hp 10
Fan 1 HP  7.5
Fan 2 HP 3
Total HP 20.5
Feed Opening 52"
Load Height 64"
Weight  3,100 lbs 

 

Features

  • Each arbor has our exclusive "spiral tine" design that both lowers the required torque and aids in the processing of large EPS chunks without operator intervention.
  • Removable discharge bin window
  • Low friction grate design
  • Direct drive gear motors, material and clean up blowers

Compatible Options

USD 0.0000

There are no products for your selection at this time. Please contact us for more information.

 

 

Our Specialty Equipment Lineup

  • EPS and Foam Densifiers
    Reduce the volume of expanded polystyrene (EPS) and foam waste with densifiers built for efficient, high-throughput processing - turning bulky foam into compact, easy-to-transport blocks.
  • XCycler
    Dewater liquid from plastic and aluminum containers before baling, reducing weight, improving recycling value, and streamlining your material handling process.
  • Shredders
    Break down bulky or oversized waste and recyclable materials into manageable sizes, improving downstream processing and equipment efficiency.
  • Tipper
    Safely and efficiently empty bins, totes, and containers into your processing system, reducing manual handling and improving workflow.


Looking for quality equipment?

JWR is your full service equipment supplier. We supply a full line of equipment to provide solutions to any recycling and waste handling situation. We offer the full package starting with site consultation, equipment selection, installation, mounting, logistics, repair service and planned maintenance. We will customize a complete package from concept to startup to meet your specific needs.

 

 

Contact Us!