{{minicart.cartList.length}}
You have no items in your quote list.
You have 1 item in your shopping cart.
{{multiCartItemsStr.replace('[COUNT]', minicart.cartList.length)}}
{{cartItem.ProductName}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
Qty: {{cartItem.Quantity | number : 2}}

Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}}
{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Subtotal {{minicart.cartTotals.SubTotal | currency : '$' : 2}}
Image Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}}
{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Description Created
{{savedCart.Description}} {{savedCart.CreateDate | date : 'M/d/yyyy h:mm a'}}
SKU Product Name Unit Cost Qty Line Total
{{cartItem.ProductSku}} {{cartItem.ProductName}} {{cartItem.UnitCost | currency : '$' : 2}} {{cartItem.Quantity | number : 2}} {{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your saved shopping cart.
You have no items in your wishlist.
Status Order No. Order Date Ship To Order Total Pay Total Balance
Bill Me Later Open Ready To Ship Shipped Picked Up Cancelled Incomplete On Hold Back Ordered Returned {{order.Status}}
{{order.OrderID}} {{order.OrderDate | date : 'M/d/yyyy'}} {{order.ShipFirstName}} {{order.ShipLastName}}, {{order.ShipAddress1}} {{order.ShipAddress2}}, {{order.ShipCity}}, {{order.ShipState}} {{order.ShipZipcode}} {{order.GrandTotal | currency : '$' : 2}} {{order.PayTotal | currency : '$' : 2}} {{order.GrandTotal - order.PayTotal | currency : '$' : 2}}

 

Mobile Refuse Equipment

JWR is proud to be an authorized reseller and service partner for Galbreath, Converto, and Curbtender and with these partnerships we are able to offer a complete line of hoists, mobile refuse collection trucks and sweepers. JWR offers full service for all of our lines of equipment: Shop service, emergency shop drive-in repairs, mount and remount, mobile service and a full line of parts to back every unit we sell.


Logo

JWR Quote Builder

JWR is authorized reseller and service partner for Galbreath, Converto, and Curbtender and with these partnerships we are able to offer a complete line of hoists, mobile refuse collection trucks and sweepers.

Grid View List View Sorting: Normal Sorting: Price Low to High Sorting: Price High to Low Sorting: New Arrivals Sorting: Brand A-Z Sorting: Brand Z-A

Lateral Camera

sku Product SKU:  654321

  • Adaptable to Aries LETS system
  • Operates in pipe size 3” and up
  • Continuous, 360° camera head rotation for a complete view of the pipe
  • “Starlight” light enhancement and automatic iris compensation maximizes visibility
  • High-intensity LED lighting to capture fine detail
  • Adaptable for mainline applications
  • Internal 512Hz transmitting beacon
  • SMARTEK internal on-screen diagnostics for continuous monitoring of internal operating system
  • Internally pressurized to prevent leakage
  • Automatically pans to the home position
  • Compatible with all Aries tractors and most multi-conductor CCTV systems

USD 0.0000

21/22 Amrep HX450 Front Loader with push out dump

sku Product SKU:  110

Amrep’s HX450FL front load refuse truck is available in multiple sizes and lengths, with full push-out or hoist ejection. Amrep's unique shaped construction, using Hardox® material, allows for a simple and clean design, providing greater strength and wear life.  

  • Body Construction

    • Entire body shell: 
      1/8”, 4mm or 3/16“ Hardox 450
    • Hopper sides: 
      4mm or 3/16” Hardox 450
    • Rear door: 
      1/8” Hardox 450
  • Lifting Mechanism

    • 14 - 18 Second cycle time
    • 1 - 8 cu yd capacity
    • Side pocket poks with dock loading capability
    • 8,000 lb lifting capacity
    • Replaceable bronze insert X-shaft bushings
  • Packing System

    • High blade or low blade with follower (low blade with follower requires horizontal exhaust)
    • Selectable pack cycles
    • Follow plate to prevent spillage behind blade
    • Full eject or hoist to dump
  • Electrical System

    • Computerized packing system
    • Packing function display
    • Harnessed wiring
    • Weather resistant quick connectors
  • Body Construction 

    • Body shell - 1/8”, 4mm or 3/16“ Hardox 450
  • Hopper Construction 

    • Lower sides - 4mm or 3/16” Hardox 450
    • Upper sides - 4mm Hardox 450
  • Hydraulic Read Door

    • Hydraulic actuated single rear steel convex door
    • Door sheets - 1/8” Hardox 450
  • Cab Canopy

    • Sides and top - 14 gauge mild steel
  • Packer Follower (Low Blade Only)

    • Attached to top of packer blade to prevent refuse from collecting in front area of body
    • Follower cover - 10 gauge high tensile steel (low blade only)
  • Packer Blade

    • Push type “A” frame box with shoes to slide In
    • Full length channel guides on body floor
    • Face - 1/4“ Hardox 450
    • Sides - 3/8” Mild Steel
    • Length - 30“
    • Width - 80”
    • Height - 60“ (high blade - 84”)
    • Guides - 6 x 15.3# channel full length of body
    • Wear guides - Hardox 500 wear plate
  • Ladder

    • Right side of body to provide access to body roof with PTO lockout when in use
  • Loading Mechanism

    • 8,000 lb capacity, rectangular tubing with flat bar straps and reinforcement gussets
  • Forks, Cross Shaft & Bearings

    • Side pocket forks 6-1/2 x 1-1/4 x 51”
    • Cross shaft - cold drawn seamless tubing
    • Tubing - 3-1/2” O.D. x 1/2” wall 80,000 psi
    • (2) Bronze bushings grooved for lubrication
    • Bushing size - 4-1/2 x 3-1/2 x 2-1/2
  • Arm Cross Shaft & Bearings

    • Cold drawn seamless tubing, bolt on mounting
    • 4-1/2” x 1/2” x 80,000 psi (3/4” & 1” optional)
    • Mounting - “U” bolt half cap wall mounted
    • (2) Full and (1) half bronze bushing grooved for lubrication
    • Full bushing - 6” O.D. x 4-1/2” I.D. x 6” long
  • Deceleration Value

    • To allow maximum operating speeds without driver correction
  • Container Stops

    • Rubber pads mounted inside forks at shaft
  • Hoses and Fittings

    • HD double wire braided parker 100r2
    • SAE hose with jic fittings
    • Zinc dichromate seamless steel tubing
  • Reservoir 

    • 60 Gallon capacity with breather cap shut off
    • Valve and tank drain plug
    • A 20-micron return line filter cartridge with a 20 psi bypass valve
    • Vertical baffles, 150-micron re-usable suction filter
  • Controls

    • Air controls mounted in cab to the right and forward of operator and outside on the street side of the body
  • Control Valve 

    • Commercial A-35 with built in relief valve
  • Power Source

    • Front mount or transmission mounted gear pump
  • Packer Cylinders

    • (2) Three stage telescopic, double acting, all chrome stages
    • 1st Stage (pack) - 6-1/2”I.D.
    • 2nd Stage (eject) - 5“ I.D.
    • 3rd Stage (eject) - 3-1/2” I.D.
    • Stroke - 162-3/4“
  • Arm Cylinders 

    • (2) - Single stage, double acting bore - 4” stroke - 48-3/8“ rod - 2” chrome
  • Fork Cylinders

    • (2) Single stage, double acting bore - 3“ stroke - 21” rod - 1-1/4“
  • Rear Door Cylinders

    • (2) Single stage, double acting bore – 2-½” Stroke – 35” Rod – 1-1/4” chrome
  • Hopper Cover Cylinder

    • (1) Single stage, double acting bore - 2” stroke - 93” rod - 1-1/4” chrome
  • Hydraulic Oil 

    • Anti-wear, corrosion, oxidation and foam inhibitors
    • ISO viscosity grade - 46
    • API gravity - 31
    • Viscosity - 220 @ 100 Deg. F
    • Flash point - 430 Deg. F
  • Lights

    • Standard ICC lights and reflectors conforming to California state vehicle code. “Truck-Lite” tail, stop, back up and directional lights
  • Mid-Body Turn Signal 

    • Directional lights mounted at mid-point of body
  • Rear Door Liquid Catch 

    • Steel construction installed under rear door to prevent liquid spill
  • Clean Out Doors 

    • Two doors at front of body 10“ x 31” (low blade only)
    • Full access door on street side of body (high blade only)
  • Steel Specifications 

    • Tensile strength - 180,000 psi
    • Tensile yield - 145,000
    • Brinell - 450
  • Estimated Body Weight

    • 16,700 lbs (options may affect total body weight) lighter bodies available with material modifications

 

USD 0.0000

Explorer Mobile System

sku Product SKU:  7654345678

Inspect water wells and other boreholes at depths up to 1200′ with the durable and compact Explorer. This fully integrated system sets up easily with one operator to streamline well evaulations and minimize operating costs.

Cart with Winch, Cable Reel, & Boom:
  • Winch/Cable. Electric winch drum with single-conductor Kevlar® braided coaxial cable and automatic level wind system
  • Cable Reel. Variable-speed motor control, up to 40 feet-per-minute (12 m/minute) and Chain drive with Emergency Rewind Handle
  • Power. 12 VDC rechargeable battery, 3- to 5-hour continuous operation at full charge; or 120 VAC/60 Hz; or 240 VAC/50 Hz
  • Boom Arm. Aluminum with foot support, adjustable for extension to 48″ (1.2 m)
  • Wheels. 16″ (400 mm); removable
  • Weight. Complete unit: approximately 150 lbs. (68 kg) and Camera only: 6 lbs. (2.7 kg)
Control Unit and Monitor:
  • Screen.  8″ (200 mm) LCD; sunlight readable
  • Recording. NTSC or PAL format with Snapshot Photo Capture and Integrated DVR Records to USB Flash Drive
  • Data. On-screen date/time, depth counter (feet or meters) and Fault Annotation & Audio (Microphone)
Dual View Camera:

Color module with dual CCD imager, low-light sensitive, 480 TVL lines resolution downhole camera, 86° wide-angle view; side view, 360° continuous scanning.

  • Iris & Focus. Iris switch, open/close for both views; focus switch, near/far for both views
  • Lighting. Forward viewing LED array with adjustable intensities
  • Seal Rating. 1200″ (400 m) below water, 600 psi (41.4 bar)
  • Material. 300 Series stainless steel; Scratch-resistant lens.

USD 0.0000

Water Well Inspection

sku Product SKU:  2567

The Water Well Inspection System is made up of five primary components: a winch, winch controller, power supply, camera and camera controller. Also included is your choice of light heads, centralizers, and a lightweight tripod with snatch block.

The Water Well Inspection System can be mounted in a vehicle with our optional swivel base winch system with a telescopic boom arm that extends 12′.

Camera Options

Our advanced cameras are designed to capture high-quality video for evaluating water wells and other boreholes:

  • BT Series Dual View for 4″ diameter boreholes
  • WC Series Slimline for 2″ diameter boreholes
  • Camera Controller – determined by camera model selected
  • Power Supply – choose from two options based on voltage, display units and cable length
Inspection Winch Options

All models are equipped with hand brake, cable head, variable speed controller, and manual counter. Level wind ensures uniform and fast camera retrieval and an encoder displays accurate on-screen depth measurement. Reel capacity ranges from 2000′ – 5000′ of single conductor 1/4″ cable, depending on winch mode.

  • Screen.  8″ (200 mm) LCD; sunlight readable
  • Recording. NTSC or PAL format with Snapshot Photo Capture and Integrated DVR Records to USB Flash Drive
  • Data. On-screen date/time, depth counter (feet or meters) and Fault Annotation & Audio (Microphone)
Winch Controller Options

Choose a hand-held or counter mounted winch controller for 120 VAC or 220 VAC service, based on your selection of inspection winch model.

USD 0.0000

Pathfinder Series

sku Product SKU:  66789

  • Works with Aries WiperCam Pan & Tilt camera
  • Operates on Aries Mobile Pathfinder PR3400 Reel or any Aries mainline Pathfinder system
  • Rear tip-up cable connection with a secure twist-lock mechanism
  • Rear-viewing camera with LED lighting
  • Available auxiliary high power detachable light head (optional)
  • Single fastener mounting for fast tire size changes
  • Six-wheel, steerable drive system to match pipe contours
  • Continuous duty drive motors
  • Operates in power forward, power reverse, steer-left, steer-right and freewheel modes
  • 512Hz sonde/locating beacon

USD 0.0000

There are no products for your selection at this time. Please contact us for more information.


Looking for quality equipment?

JWR is your full service equipment supplier. We supply a full line of equipment to provide solutions to any recycling and waste handling situation. We offer the full package starting with site consultation, equipment selection, installation, mounting, logistics, repair service and planned maintenance. We will customize a complete package from concept to startup to meet your specific needs.

 

 

Contact Us!