{{minicart.cartList.length}}
You have no items in your quote list.
You have 1 item in your shopping cart.
{{multiCartItemsStr.replace('[COUNT]', minicart.cartList.length)}}
{{cartItem.ProductName}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
Qty: {{cartItem.Quantity | number : 2}}

Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}}
{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Subtotal {{minicart.cartTotals.SubTotal | currency : '$' : 2}}
Image Item Qty Total
{{cartItem.ProductName}} {{cartItem.ProductName}}
SKU: {{cartItem.ProductSku}}
{{cartItem.Quantity | number : 2}} x {{cartItem.UnitCost | currency : '$' : 2}}
{{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your shopping cart.
Description Created
{{savedCart.Description}} {{savedCart.CreateDate | date : 'M/d/yyyy h:mm a'}}
SKU Product Name Unit Cost Qty Line Total
{{cartItem.ProductSku}} {{cartItem.ProductName}} {{cartItem.UnitCost | currency : '$' : 2}} {{cartItem.Quantity | number : 2}} {{cartItem.UnitCost * cartItem.Quantity | currency : '$' : 2}}
  • {{itemVariant.VariantHasText ? (itemVariant.VariantName + ': ' + itemVariant.VariantText) : (itemVariant.VariantGroup + ': ' + itemVariant.VariantName)}}
You have no items in your saved shopping cart.
You have no items in your wishlist.
Status Order No. Order Date Ship To Order Total Pay Total Balance
Bill Me Later Open Ready To Ship Shipped Picked Up Cancelled Incomplete On Hold Back Ordered Returned {{order.Status}}
{{order.OrderID}} {{order.OrderDate | date : 'M/d/yyyy'}} {{order.ShipFirstName}} {{order.ShipLastName}}, {{order.ShipAddress1}} {{order.ShipAddress2}}, {{order.ShipCity}}, {{order.ShipState}} {{order.ShipZipcode}} {{order.GrandTotal | currency : '$' : 2}} {{order.PayTotal | currency : '$' : 2}} {{order.GrandTotal - order.PayTotal | currency : '$' : 2}}

 

Mobile Refuse Equipment

JWR is proud to be an authorized reseller and service partner for Galbreath, Converto, and Curbtender and with these partnerships we are able to offer a complete line of hoists, mobile refuse collection trucks and sweepers. JWR offers full service for all of our lines of equipment: Shop service, emergency shop drive-in repairs, mount and remount, mobile service and a full line of parts to back every unit we sell.


Logo

JWR Quote Builder

JWR is authorized reseller and service partner for Galbreath, Converto, and Curbtender and with these partnerships we are able to offer a complete line of hoists, mobile refuse collection trucks and sweepers.

Grid View List View Sorting: Normal Sorting: Price Low to High Sorting: Price High to Low Sorting: New Arrivals Sorting: Brand A-Z Sorting: Brand Z-A

21/22 Amrep HX450 Front Loader with push out dump

sku Product SKU:  110

Amrep’s HX450FL front load refuse truck is available in multiple sizes and lengths, with full push-out or hoist ejection. Amrep's unique shaped construction, using Hardox® material, allows for a simple and clean design, providing greater strength and wear life.  

  • Body Construction

    • Entire body shell: 
      1/8”, 4mm or 3/16“ Hardox 450
    • Hopper sides: 
      4mm or 3/16” Hardox 450
    • Rear door: 
      1/8” Hardox 450
  • Lifting Mechanism

    • 14 - 18 Second cycle time
    • 1 - 8 cu yd capacity
    • Side pocket poks with dock loading capability
    • 8,000 lb lifting capacity
    • Replaceable bronze insert X-shaft bushings
  • Packing System

    • High blade or low blade with follower (low blade with follower requires horizontal exhaust)
    • Selectable pack cycles
    • Follow plate to prevent spillage behind blade
    • Full eject or hoist to dump
  • Electrical System

    • Computerized packing system
    • Packing function display
    • Harnessed wiring
    • Weather resistant quick connectors
  • Body Construction 

    • Body shell - 1/8”, 4mm or 3/16“ Hardox 450
  • Hopper Construction 

    • Lower sides - 4mm or 3/16” Hardox 450
    • Upper sides - 4mm Hardox 450
  • Hydraulic Read Door

    • Hydraulic actuated single rear steel convex door
    • Door sheets - 1/8” Hardox 450
  • Cab Canopy

    • Sides and top - 14 gauge mild steel
  • Packer Follower (Low Blade Only)

    • Attached to top of packer blade to prevent refuse from collecting in front area of body
    • Follower cover - 10 gauge high tensile steel (low blade only)
  • Packer Blade

    • Push type “A” frame box with shoes to slide In
    • Full length channel guides on body floor
    • Face - 1/4“ Hardox 450
    • Sides - 3/8” Mild Steel
    • Length - 30“
    • Width - 80”
    • Height - 60“ (high blade - 84”)
    • Guides - 6 x 15.3# channel full length of body
    • Wear guides - Hardox 500 wear plate
  • Ladder

    • Right side of body to provide access to body roof with PTO lockout when in use
  • Loading Mechanism

    • 8,000 lb capacity, rectangular tubing with flat bar straps and reinforcement gussets
  • Forks, Cross Shaft & Bearings

    • Side pocket forks 6-1/2 x 1-1/4 x 51”
    • Cross shaft - cold drawn seamless tubing
    • Tubing - 3-1/2” O.D. x 1/2” wall 80,000 psi
    • (2) Bronze bushings grooved for lubrication
    • Bushing size - 4-1/2 x 3-1/2 x 2-1/2
  • Arm Cross Shaft & Bearings

    • Cold drawn seamless tubing, bolt on mounting
    • 4-1/2” x 1/2” x 80,000 psi (3/4” & 1” optional)
    • Mounting - “U” bolt half cap wall mounted
    • (2) Full and (1) half bronze bushing grooved for lubrication
    • Full bushing - 6” O.D. x 4-1/2” I.D. x 6” long
  • Deceleration Value

    • To allow maximum operating speeds without driver correction
  • Container Stops

    • Rubber pads mounted inside forks at shaft
  • Hoses and Fittings

    • HD double wire braided parker 100r2
    • SAE hose with jic fittings
    • Zinc dichromate seamless steel tubing
  • Reservoir 

    • 60 Gallon capacity with breather cap shut off
    • Valve and tank drain plug
    • A 20-micron return line filter cartridge with a 20 psi bypass valve
    • Vertical baffles, 150-micron re-usable suction filter
  • Controls

    • Air controls mounted in cab to the right and forward of operator and outside on the street side of the body
  • Control Valve 

    • Commercial A-35 with built in relief valve
  • Power Source

    • Front mount or transmission mounted gear pump
  • Packer Cylinders

    • (2) Three stage telescopic, double acting, all chrome stages
    • 1st Stage (pack) - 6-1/2”I.D.
    • 2nd Stage (eject) - 5“ I.D.
    • 3rd Stage (eject) - 3-1/2” I.D.
    • Stroke - 162-3/4“
  • Arm Cylinders 

    • (2) - Single stage, double acting bore - 4” stroke - 48-3/8“ rod - 2” chrome
  • Fork Cylinders

    • (2) Single stage, double acting bore - 3“ stroke - 21” rod - 1-1/4“
  • Rear Door Cylinders

    • (2) Single stage, double acting bore – 2-½” Stroke – 35” Rod – 1-1/4” chrome
  • Hopper Cover Cylinder

    • (1) Single stage, double acting bore - 2” stroke - 93” rod - 1-1/4” chrome
  • Hydraulic Oil 

    • Anti-wear, corrosion, oxidation and foam inhibitors
    • ISO viscosity grade - 46
    • API gravity - 31
    • Viscosity - 220 @ 100 Deg. F
    • Flash point - 430 Deg. F
  • Lights

    • Standard ICC lights and reflectors conforming to California state vehicle code. “Truck-Lite” tail, stop, back up and directional lights
  • Mid-Body Turn Signal 

    • Directional lights mounted at mid-point of body
  • Rear Door Liquid Catch 

    • Steel construction installed under rear door to prevent liquid spill
  • Clean Out Doors 

    • Two doors at front of body 10“ x 31” (low blade only)
    • Full access door on street side of body (high blade only)
  • Steel Specifications 

    • Tensile strength - 180,000 psi
    • Tensile yield - 145,000
    • Brinell - 450
  • Estimated Body Weight

    • 16,700 lbs (options may affect total body weight) lighter bodies available with material modifications

 

USD 0.0000

There are no products for your selection at this time. Please contact us for more information.


Looking for quality equipment?

JWR is your full service equipment supplier. We supply a full line of equipment to provide solutions to any recycling and waste handling situation. We offer the full package starting with site consultation, equipment selection, installation, mounting, logistics, repair service and planned maintenance. We will customize a complete package from concept to startup to meet your specific needs.

 

 

Contact Us!